NXP USA Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MC9S08GT8AMFDE
Ver Detalle Hojas de datos

MC9S08GT8AMFDE

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, consumer electronics, industrial automation
  • Characteristics: Low power consumption, high performance, small form factor
  • Package: 32-pin LQFP (Low Profile Quad Flat Package)
  • Essence: A powerful microcontroller designed for various applications requiring low power and high performance.
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 20 MHz
  • Flash Memory: 8 KB
  • RAM: 512 bytes
  • Operating Voltage: 2.7V - 5.5V
  • I/O Pins: 27
  • Communication Interfaces: SPI, I2C, UART
  • ADC Channels: 6
  • Timers: 2 x 16-bit, 1 x 8-bit
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MC9S08GT8AMFDE microcontroller has a total of 32 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. PTA0 - General-purpose I/O pin
  3. PTA1 - General-purpose I/O pin
  4. PTA2 - General-purpose I/O pin
  5. PTA3 - General-purpose I/O pin
  6. PTA4 - General-purpose I/O pin
  7. PTA5 - General-purpose I/O pin
  8. PTA6 - General-purpose I/O pin
  9. PTA7 - General-purpose I/O pin
  10. RESET - Reset pin
  11. PTB0 - General-purpose I/O pin
  12. PTB1 - General-purpose I/O pin
  13. PTB2 - General-purpose I/O pin
  14. PTB3 - General-purpose I/O pin
  15. PTB4 - General-purpose I/O pin
  16. PTB5 - General-purpose I/O pin
  17. PTB6 - General-purpose I/O pin
  18. PTB7 - General-purpose I/O pin
  19. PTC0 - General-purpose I/O pin
  20. PTC1 - General-purpose I/O pin
  21. PTC2 - General-purpose I/O pin
  22. PTC3 - General-purpose I/O pin
  23. PTC4 - General-purpose I/O pin
  24. PTC5 - General-purpose I/O pin
  25. PTC6 - General-purpose I/O pin
  26. PTC7 - General-purpose I/O pin
  27. VSS - Ground
  28. VDD - Power supply voltage
  29. IRQ - Interrupt request pin
  30. BKGD - Background debug mode pin
  31. PTD0 - General-purpose I/O pin
  32. PTD1 - General-purpose I/O pin

Functional Features

  • Low power consumption: The MC9S08GT8AMFDE microcontroller is designed to operate efficiently with minimal power consumption, making it suitable for battery-powered applications.
  • High performance: With a CPU speed of up to 20 MHz and ample flash memory, this microcontroller offers excellent processing capabilities.
  • Small form factor: The 32-pin LQFP package ensures a compact size, making it ideal for space-constrained designs.
  • Communication interfaces: The microcontroller supports popular communication protocols such as SPI, I2C, and UART, enabling seamless integration with other devices.
  • Analog-to-Digital Converter (ADC): The built-in ADC with 6 channels allows for precise analog signal measurements.
  • Timers: The microcontroller features two 16-bit timers and one 8-bit timer, providing accurate timing control for various applications.

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life in portable devices. - High-performance CPU enables efficient processing of complex tasks. - Small form factor allows for compact designs. - Versatile communication interfaces facilitate easy integration with other devices. - Built-in ADC simplifies analog signal measurements. - Timers provide precise timing control.

Disadvantages: - Limited flash memory capacity may restrict the complexity of programs that can be stored. - 8-bit architecture may not be suitable for certain computationally intensive applications.

Working Principles

The MC9S08GT8AMFDE microcontroller operates based on an 8-bit architecture. It executes instructions stored in its flash memory to perform various tasks. The CPU, operating at a speed of up to 20 MHz, fetches instructions from memory, decodes them, and executes the corresponding operations. The microcontroller interacts with external devices through its I/O pins and communication interfaces. It can read analog signals using the built-in ADC and generate precise timing using the timers.

Detailed Application Field Plans

The MC9S08GT8AMFDE microcontroller

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MC9S08GT8AMFDE en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MC9S08GT8AMFDE in technical solutions:

  1. Q: What is MC9S08GT8AMFDE? A: MC9S08GT8AMFDE is a microcontroller from NXP Semiconductors, specifically designed for embedded applications.

  2. Q: What are the key features of MC9S08GT8AMFDE? A: Some key features include an 8-bit CPU core, flash memory, RAM, multiple I/O ports, timers, analog-to-digital converters, and serial communication interfaces.

  3. Q: What are the typical applications of MC9S08GT8AMFDE? A: MC9S08GT8AMFDE is commonly used in various technical solutions such as industrial control systems, consumer electronics, automotive applications, home automation, and IoT devices.

  4. Q: How much flash memory does MC9S08GT8AMFDE have? A: MC9S08GT8AMFDE has 8 KB of flash memory, which can be used to store program code and data.

  5. Q: Can I expand the memory of MC9S08GT8AMFDE? A: No, the memory of MC9S08GT8AMFDE is fixed and cannot be expanded externally.

  6. Q: What programming languages can be used with MC9S08GT8AMFDE? A: MC9S08GT8AMFDE can be programmed using assembly language or high-level languages like C or C++.

  7. Q: Does MC9S08GT8AMFDE support interrupts? A: Yes, MC9S08GT8AMFDE supports interrupts, allowing it to respond to external events in real-time.

  8. Q: Can MC9S08GT8AMFDE communicate with other devices? A: Yes, MC9S08GT8AMFDE has built-in serial communication interfaces like UART, SPI, and I2C, enabling it to communicate with other devices or peripherals.

  9. Q: What is the operating voltage range of MC9S08GT8AMFDE? A: MC9S08GT8AMFDE operates within a voltage range of 2.7V to 5.5V.

  10. Q: Is MC9S08GT8AMFDE suitable for low-power applications? A: Yes, MC9S08GT8AMFDE is designed to be power-efficient and can be used in battery-powered or low-power applications.

Please note that these answers are general and may vary depending on specific implementation details and requirements.