NXP USA Inc.
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MC9S08QE96CLD
Ver Detalle Hojas de datos

MC9S08QE96CLD

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, control applications
  • Characteristics: Low power consumption, high performance, small form factor
  • Package: LQFP (Low-profile Quad Flat Package)
  • Essence: 8-bit microcontroller with integrated peripherals
  • Packaging/Quantity: Tape and reel, 250 units per reel

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 50 MHz
  • Flash Memory: 96 KB
  • RAM: 4 KB
  • Operating Voltage: 2.7V to 5.5V
  • Number of I/O Pins: 48
  • Communication Interfaces: UART, SPI, I2C
  • Analog-to-Digital Converter (ADC): 10-bit, 16 channels
  • Timers: 8-bit and 16-bit timers
  • Watchdog Timer: Yes
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MC9S08QE96CLD microcontroller has a total of 48 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. PTA0 - General-purpose I/O pin
  4. PTA1 - General-purpose I/O pin
  5. PTA2 - General-purpose I/O pin
  6. PTA3 - General-purpose I/O pin
  7. PTA4 - General-purpose I/O pin
  8. PTA5 - General-purpose I/O pin
  9. PTA6 - General-purpose I/O pin
  10. PTA7 - General-purpose I/O pin
  11. RESET - Reset pin
  12. PTB0 - General-purpose I/O pin
  13. PTB1 - General-purpose I/O pin
  14. PTB2 - General-purpose I/O pin
  15. PTB3 - General-purpose I/O pin
  16. PTB4 - General-purpose I/O pin
  17. PTB5 - General-purpose I/O pin
  18. PTB6 - General-purpose I/O pin
  19. PTB7 - General-purpose I/O pin
  20. PTC0 - General-purpose I/O pin
  21. PTC1 - General-purpose I/O pin
  22. PTC2 - General-purpose I/O pin
  23. PTC3 - General-purpose I/O pin
  24. PTC4 - General-purpose I/O pin
  25. PTC5 - General-purpose I/O pin
  26. PTC6 - General-purpose I/O pin
  27. PTC7 - General-purpose I/O pin
  28. PTD0 - General-purpose I/O pin
  29. PTD1 - General-purpose I/O pin
  30. PTD2 - General-purpose I/O pin
  31. PTD3 - General-purpose I/O pin
  32. PTD4 - General-purpose I/O pin
  33. PTD5 - General-purpose I/O pin
  34. PTD6 - General-purpose I/O pin
  35. PTD7 - General-purpose I/O pin
  36. PTE0 - General-purpose I/O pin
  37. PTE1 - General-purpose I/O pin
  38. PTE2 - General-purpose I/O pin
  39. PTE3 - General-purpose I/O pin
  40. PTE4 - General-purpose I/O pin
  41. PTE5 - General-purpose I/O pin
  42. PTE6 - General-purpose I/O pin
  43. PTE7 - General-purpose I/O pin
  44. VDDA - Analog power supply voltage
  45. VREFH - High reference voltage for ADC
  46. VREFL - Low reference voltage for ADC
  47. VSSA - Analog ground
  48. VBAT - Backup battery input

Functional Features

  • High-performance 8-bit CPU with low power consumption
  • Integrated peripherals such as UART, SPI, and I2C for communication
  • 10-bit ADC for analog signal conversion
  • Timers for precise timing control
  • Watchdog timer for system reliability
  • Wide operating voltage range for flexibility
  • Small form factor package for space-constrained applications

Advantages and Disadvantages

Advantages: - High performance for demanding control applications - Low power consumption for energy-efficient designs - Integrated peripherals reduce external component count - Wide operating voltage range allows for versatile use - Small form factor package saves board space

Disadvantages: - Limited processing power compared to higher-bit microcontrollers - Limited memory capacity for large-scale applications - Limited number of I/O pins for complex systems

Working Principles

The MC9S08QE96CLD microcontroller operates based on an 8-bit architecture. It executes instructions stored in its flash memory and interacts with external devices through its integrated peripherals

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MC9S08QE96CLD en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of MC9S08QE96CLD in technical solutions:

  1. Q: What is MC9S08QE96CLD? A: MC9S08QE96CLD is a microcontroller from the S08 family, manufactured by NXP Semiconductors.

  2. Q: What are the key features of MC9S08QE96CLD? A: Some key features of MC9S08QE96CLD include a 8-bit CPU core, 96KB flash memory, 4KB RAM, multiple communication interfaces, and various peripherals.

  3. Q: What technical solutions can MC9S08QE96CLD be used for? A: MC9S08QE96CLD can be used in a wide range of applications such as industrial control systems, consumer electronics, automotive systems, and home automation.

  4. Q: How many I/O pins does MC9S08QE96CLD have? A: MC9S08QE96CLD has a total of 56 I/O pins, which can be configured for various purposes.

  5. Q: What programming language can be used to program MC9S08QE96CLD? A: MC9S08QE96CLD can be programmed using C or assembly language.

  6. Q: Can MC9S08QE96CLD communicate with other devices? A: Yes, MC9S08QE96CLD supports various communication interfaces such as UART, SPI, and I2C, allowing it to communicate with other devices.

  7. Q: What is the operating voltage range of MC9S08QE96CLD? A: MC9S08QE96CLD operates at a voltage range of 2.7V to 5.5V.

  8. Q: Does MC9S08QE96CLD have any built-in analog-to-digital converters (ADC)? A: Yes, MC9S08QE96CLD has a 10-bit ADC module with multiple channels for analog signal conversion.

  9. Q: Can MC9S08QE96CLD be used in low-power applications? A: Yes, MC9S08QE96CLD has various power-saving modes and features that make it suitable for low-power applications.

  10. Q: Is there any development board available for MC9S08QE96CLD? A: Yes, NXP provides development boards like the FRDM-KE06Z, which can be used for prototyping and testing MC9S08QE96CLD-based solutions.

Please note that these answers are general and may vary depending on specific requirements and use cases.