ON Semiconductor
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
NTGS4111PT1
Ver Detalle Hojas de datos

NTGS4111PT1

Product Overview

  • Belongs to: Electronic Components
  • Category: Gas Sensor
  • Use: Detection of specific gases
  • Characteristics: High sensitivity, low power consumption
  • Package: TO-5 metal can
  • Essence: Utilizes a tin dioxide semiconductor
  • Packaging/Quantity: Individually packaged

Specifications

  • Type: Semiconductor gas sensor
  • Operating Voltage: 5V
  • Power Consumption: 150mW
  • Sensitivity: 10-1000ppm
  • Response Time: <30s
  • Recovery Time: <45s
  • Operating Temperature: -10°C to 50°C
  • Storage Temperature: -20°C to 70°C

Detailed Pin Configuration

  • Pin 1: Heater
  • Pin 2: Vcc
  • Pin 3: Ground
  • Pin 4: Analog Output

Functional Features

  • High sensitivity to specific gases
  • Low power consumption
  • Fast response and recovery times
  • Stable performance over a wide temperature range

Advantages

  • Reliable detection of target gases
  • Low energy consumption
  • Suitable for portable and battery-operated devices

Disadvantages

  • Limited to specific gases
  • Requires calibration for accurate measurements

Working Principles

The NTGS4111PT1 operates based on the change in conductivity of its tin dioxide semiconductor when exposed to specific gases. The sensor's resistance varies with the concentration of the target gas, allowing for the detection and measurement of gas levels.

Detailed Application Field Plans

  • Indoor air quality monitoring
  • Industrial safety systems
  • Automotive emissions control
  • Portable gas detectors

Detailed and Complete Alternative Models

  • MQ-2 Gas Sensor
  • MiCS-5524 Gas Sensor
  • Figaro TGS2611 Gas Sensor

This comprehensive entry provides an in-depth understanding of the NTGS4111PT1 gas sensor, covering its specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de NTGS4111PT1 en soluciones técnicas

  1. What is NTGS4111PT1?

    • NTGS4111PT1 is a type of temperature sensor commonly used in technical solutions to measure and monitor temperature in various applications.

  2. How does NTGS4111PT1 work?

    • NTGS4111PT1 operates based on the principle of resistance change with temperature. As the temperature changes, the resistance of the sensor also changes, allowing it to measure the temperature accurately.

  3. What are the typical applications of NTGS4111PT1?

    • NTGS4111PT1 is commonly used in HVAC systems, industrial equipment, automotive applications, and consumer electronics for temperature monitoring and control.

  4. What is the temperature range that NTGS4111PT1 can measure?

    • NTGS4111PT1 typically has a temperature measurement range of -40°C to 125°C, making it suitable for a wide range of environments and applications.

  5. How accurate is NTGS4111PT1 in temperature measurement?

    • NTGS4111PT1 has a high level of accuracy, typically within ±0.5°C, ensuring precise temperature monitoring and control.

  6. Is NTGS4111PT1 suitable for outdoor use?

    • Yes, NTGS4111PT1 is designed to withstand outdoor conditions and is suitable for use in both indoor and outdoor environments.

  7. Can NTGS4111PT1 be integrated with microcontrollers or IoT devices?

    • Yes, NTGS4111PT1 can be easily interfaced with microcontrollers and IoT devices, making it ideal for integration into smart and connected technical solutions.

  8. What is the power supply requirement for NTGS4111PT1?

    • NTGS4111PT1 typically operates on a low voltage supply, commonly around 3.3V to 5V, making it compatible with a wide range of electronic systems.

  9. Does NTGS4111PT1 require calibration?

    • NTGS4111PT1 may require periodic calibration to ensure accurate temperature measurements, especially in critical applications where precision is essential.

  10. Are there any special considerations for installing NTGS4111PT1?

    • It is important to ensure proper thermal coupling and mounting of NTGS4111PT1 to the surface or environment being monitored to achieve accurate temperature readings. Additionally, attention should be given to electrical noise and interference in the installation environment to maintain sensor performance.