ON Semiconductor
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
UC2842BNG
Ver Detalle Hojas de datos

UC2842BNG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Mode PWM Controller
  • Characteristics: High-performance, low-power, fixed-frequency current-mode control IC
  • Package: DIP-8 (Dual In-line Package with 8 pins)
  • Essence: Regulates the output voltage of power supplies by controlling the duty cycle of a switching transistor
  • Packaging/Quantity: Available in reels or tubes, typically sold in quantities of 1000 units

Specifications

  • Input Voltage Range: 7.6V to 30V
  • Output Voltage Range: 5V to 20V
  • Operating Temperature Range: -40°C to +85°C
  • Switching Frequency: Adjustable up to 500kHz
  • Maximum Duty Cycle: 50%
  • Output Current: Up to 1A

Pin Configuration

The UC2842BNG has the following pin configuration:

  1. VREF: Reference voltage for error amplifier
  2. COMP: Output of the error amplifier
  3. FB: Feedback input for regulating the output voltage
  4. GND: Ground reference
  5. CS: Current sense input for current-mode control
  6. RT/CT: Timing components for setting oscillator frequency
  7. OUT: Output of the PWM controller
  8. VCC: Power supply input

Functional Features

  • Current-Mode Control: Provides excellent line and load regulation
  • Adjustable Oscillator Frequency: Allows flexibility in designing different power supply topologies
  • Soft Start: Gradually ramps up the output voltage during startup, reducing stress on components
  • Protection Features: Overcurrent protection, undervoltage lockout, and thermal shutdown

Advantages and Disadvantages

Advantages: - High-performance and low-power consumption - Wide input voltage range allows for versatile applications - Adjustable switching frequency enables optimization for different designs - Comprehensive protection features ensure system reliability

Disadvantages: - Limited maximum duty cycle may restrict certain applications - Requires external components for complete power supply design

Working Principles

The UC2842BNG operates as a voltage mode PWM controller. It regulates the output voltage of power supplies by controlling the duty cycle of a switching transistor. The error amplifier compares the feedback voltage (FB) with a reference voltage (VREF) and generates an error signal. This error signal is then compared with the sawtooth waveform generated by the oscillator. Based on this comparison, the PWM controller adjusts the duty cycle to maintain the desired output voltage.

Detailed Application Field Plans

The UC2842BNG is commonly used in various power supply applications, including:

  1. Switching Mode Power Supplies (SMPS)
  2. DC-DC Converters
  3. LED Drivers
  4. Battery Chargers
  5. Industrial Control Systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the UC2842BNG are:

  1. UC3842BNG: Similar functionality but with higher output current capability
  2. TL494CN: PWM controller with additional features like dead-time control and shutdown input
  3. SG3525AN: Voltage mode PWM controller with adjustable frequency and duty cycle

These alternative models offer similar functionalities and can be suitable replacements depending on specific requirements.

Word count: 314 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de UC2842BNG en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of UC2842BNG in technical solutions:

  1. Q: What is UC2842BNG? A: UC2842BNG is a pulse width modulation (PWM) controller IC commonly used in power supply applications.

  2. Q: What is the operating voltage range of UC2842BNG? A: The operating voltage range of UC2842BNG is typically between 7V and 30V.

  3. Q: What is the maximum output current that UC2842BNG can handle? A: UC2842BNG can handle a maximum output current of around 1A.

  4. Q: Can UC2842BNG be used in both buck and boost converter configurations? A: Yes, UC2842BNG can be used in both buck and boost converter configurations.

  5. Q: What is the purpose of the error amplifier in UC2842BNG? A: The error amplifier in UC2842BNG compares the feedback voltage with a reference voltage to regulate the output voltage.

  6. Q: How does UC2842BNG control the duty cycle of the PWM signal? A: UC2842BNG uses an internal oscillator and a voltage-controlled oscillator (VCO) to control the duty cycle of the PWM signal.

  7. Q: Can UC2842BNG operate in continuous or discontinuous mode? A: UC2842BNG can operate in both continuous and discontinuous mode, depending on the load conditions.

  8. Q: What protections does UC2842BNG provide? A: UC2842BNG provides protections such as overcurrent protection, undervoltage lockout, and thermal shutdown.

  9. Q: Is UC2842BNG suitable for high-frequency switching applications? A: Yes, UC2842BNG is suitable for high-frequency switching applications due to its fast response time.

  10. Q: What are some typical applications of UC2842BNG? A: Some typical applications of UC2842BNG include switch-mode power supplies, LED drivers, battery chargers, and motor control circuits.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.