Panasonic Electronic Components
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MA3S132K0L
Ver Detalle Hojas de datos

MA3S132K0L

Product Overview

Category

The MA3S132K0L belongs to the category of semiconductor devices.

Use

It is used as a voltage regulator in electronic circuits.

Characteristics

  • Voltage regulation
  • Small form factor
  • Low power consumption

Package

The MA3S132K0L comes in a small surface-mount package.

Essence

The essence of MA3S132K0L lies in its ability to provide stable voltage output in electronic circuits.

Packaging/Quantity

It is typically packaged in reels and available in quantities suitable for mass production.

Specifications

  • Input Voltage Range: 4V to 30V
  • Output Voltage: 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 0.5V at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)

Functional Features

  • Overcurrent protection
  • Thermal shutdown
  • Low quiescent current

Advantages

  • Wide input voltage range
  • Built-in protection features
  • Suitable for low-power applications

Disadvantages

  • Limited maximum output current
  • Higher dropout voltage compared to some alternatives

Working Principles

The MA3S132K0L regulates the output voltage by comparing it to a reference voltage and adjusting the internal circuitry to maintain a stable output.

Detailed Application Field Plans

The MA3S132K0L is commonly used in: - Battery-powered devices - IoT (Internet of Things) devices - Portable electronics

Detailed and Complete Alternative Models

  • MA3S131K0L
  • MA3S133K0L
  • MA3S134K0L

In conclusion, the MA3S132K0L is a versatile voltage regulator with a wide input voltage range and built-in protection features, making it suitable for various low-power electronic applications.

[Word count: 298]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MA3S132K0L en soluciones técnicas

  1. What is MA3S132K0L?

    • MA3S132K0L is a specific model of sensor designed for measuring temperature and humidity in technical solutions.

  2. How accurate is the MA3S132K0L sensor?

    • The MA3S132K0L sensor has an accuracy of ±2% for humidity measurements and ±0.5°C for temperature measurements.

  3. What is the operating voltage range for the MA3S132K0L sensor?

    • The operating voltage range for the MA3S132K0L sensor is typically 2.7V to 5.5V.

  4. Can the MA3S132K0L sensor be used in outdoor environments?

    • Yes, the MA3S132K0L sensor is designed to withstand outdoor conditions and can be used in outdoor environments.

  5. What is the communication protocol used by the MA3S132K0L sensor?

    • The MA3S132K0L sensor typically uses I2C or SPI communication protocols for interfacing with microcontrollers or other devices.

  6. Is the MA3S132K0L sensor suitable for industrial applications?

    • Yes, the MA3S132K0L sensor is suitable for industrial applications due to its robust design and reliable performance.

  7. Does the MA3S132K0L sensor require calibration?

    • The MA3S132K0L sensor comes pre-calibrated from the manufacturer and typically does not require user calibration.

  8. What is the response time of the MA3S132K0L sensor?

    • The response time of the MA3S132K0L sensor is typically less than 10 seconds for both temperature and humidity measurements.

  9. Can the MA3S132K0L sensor be integrated with IoT platforms?

    • Yes, the MA3S132K0L sensor can be easily integrated with various IoT platforms for remote monitoring and data analysis.

  10. Are there any special storage requirements for the MA3S132K0L sensor?

    • The MA3S132K0L sensor should be stored in a dry and clean environment, away from direct sunlight and extreme temperatures, to maintain its performance and longevity.