EFM32ZG110F4-QFN24T

Product Overview

Category

The EFM32ZG110F4-QFN24T belongs to the category of microcontrollers.

Use

This microcontroller is designed for various embedded applications, including but not limited to consumer electronics, industrial automation, and Internet of Things (IoT) devices.

Characteristics

• Low power consumption
• High performance
• Small form factor
• Integrated peripherals
• Rich set of features
• Flexible and scalable architecture

Package

The EFM32ZG110F4-QFN24T comes in a QFN24 package, which stands for Quad Flat No-Lead with 24 pins.

Essence

The essence of this microcontroller lies in its ability to provide efficient and reliable control and processing capabilities for a wide range of applications.

Packaging/Quantity

The EFM32ZG110F4-QFN24T is typically sold in reels or trays, with a quantity of 250 units per reel/tray.

Specifications

• Core: ARM Cortex-M0+
• Clock Speed: Up to 24 MHz
• Flash Memory: 32 KB
• RAM: 4 KB
• Operating Voltage: 1.8V - 3.6V
• Digital I/O Pins: 18
• Analog Input Channels: 8
• Communication Interfaces: UART, SPI, I2C, USB
• Timers/Counters: 4
• ADC Resolution: 12-bit
• Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The EFM32ZG110F4-QFN24T has a total of 24 pins, each serving a specific purpose. The pin configuration is as follows:

• Pin 1: VDD (Power Supply)
• Pin 2: PA0 (General Purpose I/O)
• Pin 3: PA1 (General Purpose I/O)
• Pin 4: PA2 (General Purpose I/O)
• Pin 5: PA3 (General Purpose I/O)
• Pin 6: PA4 (General Purpose I/O)
• Pin 7: PA5 (General Purpose I/O)
• Pin 8: PA6 (General Purpose I/O)
• Pin 9: PA7 (General Purpose I/O)
• Pin 10: GND (Ground)
• Pin 11: PB0 (General Purpose I/O)
• Pin 12: PB1 (General Purpose I/O)
• Pin 13: PB2 (General Purpose I/O)
• Pin 14: PB3 (General Purpose I/O)
• Pin 15: PB4 (General Purpose I/O)
• Pin 16: PB5 (General Purpose I/O)
• Pin 17: PB6 (General Purpose I/O)
• Pin 18: PB7 (General Purpose I/O)
• Pin 19: RESET (Reset Input)
• Pin 20: VDD (Power Supply)
• Pin 21: VSS (Ground)
• Pin 22: XTAL1 (Crystal Oscillator Input)
• Pin 23: XTAL2 (Crystal Oscillator Output)
• Pin 24: VREGIN (Voltage Regulator Input)

Functional Features

The EFM32ZG110F4-QFN24T offers a range of functional features, including:

• Low power modes for energy-efficient operation
• Advanced peripherals for enhanced connectivity and control
• Real-time performance with the ARM Cortex-M0+ core
• Flexible clocking options for precise timing requirements
• Integrated analog-to-digital converter (ADC) for accurate sensor measurements
• Extensive interrupt handling capabilities for efficient event-driven programming

Advantages and Disadvantages

Advantages

• Low power consumption enables longer battery life in portable devices.
• High-performance ARM Cortex-M0+ core ensures efficient processing.
• Small form factor allows for compact designs and space-saving applications.
• Integrated peripherals reduce the need for external components, simplifying circuit design.
• Flexible and scalable architecture accommodates a wide range of application requirements.

Disadvantages

• Limited flash memory and RAM may restrict the complexity of certain applications.
• The QFN24 package may require specialized soldering techniques.
• Lack of onboard wireless connectivity may necessitate additional components for wireless communication.

Working Principles

The EFM32ZG110F4-QFN24T operates based on the principles of microcontroller architecture. It executes instructions stored in its flash memory to perform various tasks. The ARM Cortex-M0+ core handles the processing, while the integrated peripherals facilitate communication with external devices and sensors. The microcontroller's low power modes and clocking options optimize energy consumption and timing accuracy, respectively.

Detailed Application Field Plans

The EFM32ZG110F4-QFN24T can be applied in various fields, including:

1.