STMicroelectronics
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
LD1117D25
Ver Detalle Hojas de datos

LD1117D25

Product Overview

Category

The LD1117D25 belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • Output current up to 800 mA
  • Fixed output voltage of 2.5 V
  • Thermal overload protection
  • Short-circuit current limiting

Package

The LD1117D25 comes in a TO-220 package, which is a widely used through-hole package for power semiconductors.

Essence

The essence of LD1117D25 lies in its ability to provide a stable and regulated output voltage of 2.5 V with low dropout voltage.

Packaging/Quantity

The LD1117D25 is typically packaged in reels or tubes, containing a specific quantity of units per package.

Specifications

  • Input Voltage Range: 4.75 V to 15 V
  • Output Voltage: 2.5 V
  • Dropout Voltage: 1.2 V (typical)
  • Output Current: Up to 800 mA
  • Operating Temperature Range: -40°C to +125°C
  • Line Regulation: ±0.2% (typical)
  • Load Regulation: ±0.4% (typical)

Detailed Pin Configuration

The LD1117D25 has three pins:

  1. VIN (Input Voltage): This pin is connected to the input voltage source.
  2. GND (Ground): This pin is connected to the ground reference.
  3. VOUT (Output Voltage): This pin provides the regulated output voltage of 2.5 V.

Functional Features

  • Low dropout voltage ensures efficient regulation even when the input voltage is close to the desired output voltage.
  • Thermal overload protection prevents the device from getting damaged due to excessive heat.
  • Short-circuit current limiting protects the LD1117D25 and the connected circuitry from damage in case of a short circuit.

Advantages and Disadvantages

Advantages

  • Stable and regulated output voltage.
  • Low dropout voltage allows for efficient operation.
  • Thermal overload protection ensures device safety.
  • Short-circuit current limiting protects the circuitry.

Disadvantages

  • Fixed output voltage may limit its use in applications requiring variable output voltages.
  • Limited output current capacity compared to some other voltage regulators.

Working Principles

The LD1117D25 is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage, adjusting the pass transistor's resistance to maintain a constant output voltage.

Detailed Application Field Plans

The LD1117D25 finds applications in various electronic circuits where a stable 2.5 V voltage supply is required. Some common application areas include:

  1. Battery-powered devices: It can be used to regulate the voltage supplied by batteries to ensure consistent performance.
  2. Microcontrollers and digital ICs: It provides a stable power source for these components, ensuring reliable operation.
  3. Sensor circuits: The LD1117D25 helps maintain a steady voltage supply for accurate sensor readings.
  4. Audio amplifiers: It can be used to regulate the voltage supplied to audio amplifier circuits, improving audio quality.

Detailed and Complete Alternative Models

Some alternative models to LD1117D25 that offer similar functionality are:

  1. LM1117-2.5: A popular voltage regulator with a fixed output voltage of 2.5 V.
  2. LT1117-2.5: Another voltage regulator with a fixed output voltage of 2.5 V, known for its low dropout voltage.
  3. MCP1702-2502E: A low dropout voltage regulator with a fixed output voltage of 2.5 V.

These alternative models can be considered based on specific requirements and availability.

Word count: 511 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de LD1117D25 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of LD1117D25 in technical solutions:

  1. Q: What is LD1117D25? A: LD1117D25 is a low-dropout voltage regulator IC that provides a fixed output voltage of 2.5V.

  2. Q: What is the maximum input voltage for LD1117D25? A: The maximum input voltage for LD1117D25 is typically 15V, although it can handle up to 20V in some cases.

  3. Q: What is the dropout voltage of LD1117D25? A: The dropout voltage of LD1117D25 is typically around 1.2V at a load current of 800mA.

  4. Q: Can LD1117D25 be used to regulate higher voltages? A: No, LD1117D25 is specifically designed to provide a fixed output voltage of 2.5V and cannot be adjusted to regulate higher voltages.

  5. Q: What is the maximum output current of LD1117D25? A: LD1117D25 can provide a maximum output current of 800mA.

  6. Q: Is LD1117D25 suitable for battery-powered applications? A: Yes, LD1117D25 is commonly used in battery-powered applications due to its low dropout voltage and low quiescent current.

  7. Q: Does LD1117D25 require any external components for operation? A: Yes, LD1117D25 requires input and output capacitors for stability and proper operation. Refer to the datasheet for recommended values.

  8. Q: Can LD1117D25 handle short-circuit conditions? A: Yes, LD1117D25 has built-in short-circuit protection, which helps protect the IC from damage during short-circuit conditions.

  9. Q: Can LD1117D25 operate in high-temperature environments? A: LD1117D25 has a maximum junction temperature of 125°C, making it suitable for operation in moderate to high-temperature environments.

  10. Q: Are there any alternatives to LD1117D25 with different output voltages? A: Yes, LD1117 series offers various fixed output voltage options. You can choose an alternative model with the desired output voltage based on your application requirements.

Please note that these answers are general and may vary depending on specific datasheet specifications and application considerations.