STMicroelectronics
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
SPC560P40L3CEFBY
Ver Detalle Hojas de datos

SPC560P40L3CEFBY

Basic Information Overview

  • Category: Microcontroller
  • Use: Automotive applications
  • Characteristics: High-performance, low-power consumption
  • Package: LQFP
  • Essence: Advanced microcontroller for automotive systems
  • Packaging/Quantity: Tape and reel, 250 units per reel

Specifications

  • Architecture: Power Architecture® Technology
  • CPU Core: e200z0h
  • Clock Frequency: Up to 64 MHz
  • Flash Memory: 1 MB
  • RAM: 128 KB
  • Operating Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +125°C
  • Communication Interfaces: CAN, LIN, FlexRay, SPI, I2C, UART
  • Analog-to-Digital Converter (ADC): 12-bit, up to 16 channels
  • Timers: 32-bit, up to 8 channels
  • PWM Outputs: Up to 8 channels
  • Operating Current: 10 mA (typical)

Detailed Pin Configuration

The SPC560P40L3CEFBY microcontroller has a total of 144 pins. The pin configuration is as follows:

  • Pins 1-8: VDDA, analog power supply
  • Pins 9-16: VSSA, analog ground
  • Pins 17-24: VDD, digital power supply
  • Pins 25-32: VSS, digital ground
  • Pins 33-40: RESET, reset signal input
  • Pins 41-48: XTAL_IN, external crystal oscillator input
  • Pins 49-56: XTAL_OUT, external crystal oscillator output
  • Pins 57-64: TEST, test mode control
  • Pins 65-72: ADC_IN, analog input channels
  • Pins 73-80: ADC_REF, analog reference voltage
  • Pins 81-88: CAN_TX, CAN bus transmit
  • Pins 89-96: CAN_RX, CAN bus receive
  • Pins 97-104: LIN_TX, LIN bus transmit
  • Pins 105-112: LIN_RX, LIN bus receive
  • Pins 113-120: FlexRay_TX, FlexRay bus transmit
  • Pins 121-128: FlexRay_RX, FlexRay bus receive
  • Pins 129-136: SPI, serial peripheral interface
  • Pins 137-144: I2C, inter-integrated circuit

Functional Features

  • High-performance microcontroller for automotive applications
  • Low-power consumption for energy efficiency
  • Advanced architecture for enhanced processing capabilities
  • Wide range of communication interfaces for seamless integration with other systems
  • Robust analog-to-digital converter for accurate sensor readings
  • Flexible timers and PWM outputs for precise timing control

Advantages and Disadvantages

Advantages: - High-performance and low-power consumption make it ideal for automotive applications - Extensive communication interfaces allow for easy integration into various systems - Robust analog-to-digital converter ensures accurate sensor readings - Flexible timers and PWM outputs provide precise timing control

Disadvantages: - Limited flash memory and RAM capacity compared to some other microcontrollers in the market - Higher cost compared to entry-level microcontrollers

Working Principles

The SPC560P40L3CEFBY microcontroller operates on Power Architecture® Technology. It utilizes the e200z0h CPU core and can run at clock frequencies of up to 64 MHz. The microcontroller is designed to meet the demanding requirements of automotive applications, providing high performance while minimizing power consumption.

It incorporates a wide range of communication interfaces such as CAN, LIN, FlexRay, SPI, I2C, and UART, allowing seamless connectivity with other automotive systems. The microcontroller also features a 12-bit analog-to-digital converter (ADC) with up to 16 channels, enabling accurate measurement of various sensors.

The flexible timers and PWM outputs of the SPC560P40L3CEFBY provide precise timing control, essential for applications that require accurate synchronization or pulse generation.

Detailed Application Field Plans

The SPC560P40L3CEFBY microcontroller is widely used in automotive applications, including:

  1. Engine Control Units (ECUs)
  2. Transmission Control Units (TCUs)
  3. Body Control Modules (BCMs)
  4. Advanced Driver Assistance Systems (ADAS)
  5. Infotainment Systems
  6. Electric Power Steering (EPS) Systems
  7. Anti-lock Braking Systems (ABS)
  8. Airbag Control Units (ACUs)

Its high-performance capabilities, low-power consumption, and extensive communication interfaces make it suitable for various automotive subsystems.

Detailed and Complete Alternative Models

  1. SPC560P34L3CEFBY: Similar microcontroller with lower flash memory and RAM capacity.
  2. SPC560P44L

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de SPC560P40L3CEFBY en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of SPC560P40L3CEFBY in technical solutions:

  1. Q: What is SPC560P40L3CEFBY? A: SPC560P40L3CEFBY is a microcontroller from the SPC560Pxx family, specifically designed for automotive applications.

  2. Q: What are the key features of SPC560P40L3CEFBY? A: Some key features include a Power Architecture® core, Flash memory, RAM, multiple communication interfaces, and various peripherals for automotive systems.

  3. Q: What are the typical applications of SPC560P40L3CEFBY? A: SPC560P40L3CEFBY is commonly used in automotive applications such as engine control units (ECUs), body control modules (BCMs), and advanced driver-assistance systems (ADAS).

  4. Q: What is the maximum clock frequency supported by SPC560P40L3CEFBY? A: The maximum clock frequency supported by SPC560P40L3CEFBY is typically 80 MHz.

  5. Q: How much Flash memory does SPC560P40L3CEFBY have? A: SPC560P40L3CEFBY has a Flash memory size of 1 MB.

  6. Q: Can I expand the memory of SPC560P40L3CEFBY? A: No, the memory of SPC560P40L3CEFBY is fixed and cannot be expanded externally.

  7. Q: What communication interfaces are available on SPC560P40L3CEFBY? A: SPC560P40L3CEFBY supports various communication interfaces such as CAN, LIN, FlexRay, SPI, I2C, and UART.

  8. Q: Does SPC560P40L3CEFBY have any built-in security features? A: Yes, SPC560P40L3CEFBY includes built-in security features like a hardware cryptographic module, memory protection unit (MPU), and secure boot capabilities.

  9. Q: What development tools are available for programming SPC560P40L3CEFBY? A: NXP provides a range of development tools, including an Integrated Development Environment (IDE) called S32 Design Studio, which supports programming and debugging of SPC560P40L3CEFBY.

  10. Q: Is SPC560P40L3CEFBY automotive-grade and compliant with industry standards? A: Yes, SPC560P40L3CEFBY is designed to meet the stringent requirements of the automotive industry and complies with relevant standards such as ISO 26262 for functional safety.

Please note that the specific details may vary depending on the manufacturer's documentation and version of the microcontroller.