STMicroelectronics
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
STD6N90K5
Ver Detalle Hojas de datos

STD6N90K5

Product Overview

  • Category: Power MOSFET
  • Use: Switching and amplification in power electronics applications
  • Characteristics: High voltage, low on-resistance, fast switching speed
  • Package: TO-252-3 (DPAK)
  • Essence: Efficient power management
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Voltage Rating: 900V
  • Current Rating: 6A
  • On-Resistance: 1.8Ω
  • Gate Threshold Voltage: 2-4V
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

  • Pin 1: Gate
  • Pin 2: Drain
  • Pin 3: Source

Functional Features

  • Fast switching speed for improved efficiency
  • Low on-resistance for reduced power loss
  • High voltage rating for versatile applications
  • Enhanced thermal performance for reliability

Advantages and Disadvantages

Advantages

  • High voltage rating allows for diverse application scenarios
  • Low on-resistance minimizes power dissipation
  • Fast switching speed enhances efficiency

Disadvantages

  • Sensitive to static electricity and voltage spikes
  • Requires careful handling during assembly and operation

Working Principles

The STD6N90K5 operates based on the principles of field-effect transistors, utilizing the gate voltage to control the flow of current between the drain and source terminals. When a sufficient gate voltage is applied, the device switches on, allowing current to flow through.

Detailed Application Field Plans

The STD6N90K5 is suitable for various power electronics applications, including: - Switch-mode power supplies - Motor control - LED lighting - Solar inverters - Audio amplifiers

Detailed and Complete Alternative Models

  • STP6NK90ZFP
  • IRFP4568PBF
  • FDPF7N50NZ

Note: The above list is not exhaustive and serves as a starting point for alternative models.

This comprehensive entry provides an in-depth understanding of the STD6N90K5 Power MOSFET, covering its specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de STD6N90K5 en soluciones técnicas

  1. What is the maximum drain-source voltage of STD6N90K5?

    • The maximum drain-source voltage of STD6N90K5 is 900V.

  2. What is the continuous drain current rating of STD6N90K5?

    • The continuous drain current rating of STD6N90K5 is 6A.

  3. What is the on-state resistance (RDS(on)) of STD6N90K5?

    • The on-state resistance (RDS(on)) of STD6N90K5 is typically 1.15 ohms.

  4. What is the gate-source threshold voltage of STD6N90K5?

    • The gate-source threshold voltage of STD6N90K5 is typically 2-4V.

  5. What are the typical applications for STD6N90K5?

    • STD6N90K5 is commonly used in power supplies, motor control, and lighting applications.

  6. What is the maximum junction temperature of STD6N90K5?

    • The maximum junction temperature of STD6N90K5 is 150°C.

  7. Is STD6N90K5 suitable for high-frequency switching applications?

    • Yes, STD6N90K5 is suitable for high-frequency switching due to its fast switching characteristics.

  8. Does STD6N90K5 require a heat sink for certain applications?

    • Depending on the application and power dissipation, a heat sink may be required for STD6N90K5.

  9. What are the recommended operating conditions for STD6N90K5?

    • The recommended operating temperature range for STD6N90K5 is -55°C to 150°C.

  10. Can STD6N90K5 be used in automotive applications?

    • Yes, STD6N90K5 can be used in automotive applications, provided it meets the specific requirements and standards for automotive electronics.