STMicroelectronics
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
STP75NF75FP
Ver Detalle Hojas de datos

STP75NF75FP

Product Overview

Category

The STP75NF75FP belongs to the category of power MOSFETs.

Use

It is commonly used in electronic circuits for switching and amplification applications.

Characteristics

  • High voltage capability
  • Low input capacitance
  • Fast switching speed
  • Low on-resistance

Package

The STP75NF75FP is typically available in a TO-220 package.

Essence

This MOSFET is essential for controlling high-power loads in various electronic devices and systems.

Packaging/Quantity

The STP75NF75FP is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Drain-Source Voltage (VDS): 75V
  • Continuous Drain Current (ID): 75A
  • On-Resistance (RDS(on)): 0.008 ohms
  • Power Dissipation (PD): 200W
  • Gate-Source Voltage (VGS): ±20V
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The STP75NF75FP typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows for use in various power applications.
  • Low input capacitance enables fast switching speeds.
  • Low on-resistance minimizes power loss and heat generation.

Advantages

  • Suitable for high-power applications
  • Fast switching speed
  • Low power dissipation

Disadvantages

  • Higher cost compared to lower-rated MOSFETs
  • May require additional heat sinking for certain high-power applications

Working Principles

The STP75NF75FP operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The STP75NF75FP is commonly used in: - Switching power supplies - Motor control systems - Audio amplifiers - LED lighting systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to the STP75NF75FP include: - IRF540N - FQP30N06L - IRLB8748

In conclusion, the STP75NF75FP is a versatile power MOSFET with high voltage capability, fast switching speed, and low on-resistance, making it suitable for a wide range of high-power electronic applications.

[Word count: 320]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de STP75NF75FP en soluciones técnicas

  1. What is the STP75NF75FP transistor used for?

    • The STP75NF75FP is a power MOSFET transistor commonly used in high-power applications such as motor control, power supplies, and automotive systems.

  2. What is the maximum voltage and current rating of the STP75NF75FP?

    • The STP75NF75FP has a maximum voltage rating of 75V and a continuous drain current rating of 80A.

  3. Can the STP75NF75FP be used for switching applications?

    • Yes, the STP75NF75FP is suitable for switching applications due to its low on-state resistance and fast switching characteristics.

  4. What are the typical thermal characteristics of the STP75NF75FP?

    • The STP75NF75FP has a low thermal resistance and is designed to efficiently dissipate heat, making it suitable for high-power applications.

  5. Is the STP75NF75FP suitable for use in automotive systems?

    • Yes, the STP75NF75FP is commonly used in automotive systems such as motor control and power distribution due to its high current and voltage ratings.

  6. What are the key features of the STP75NF75FP?

    • The STP75NF75FP features low on-state resistance, high current capability, and robustness, making it suitable for demanding technical solutions.

  7. Does the STP75NF75FP require any special driving circuitry?

    • The STP75NF75FP can be driven by standard MOSFET driver circuits and does not typically require any special driving circuitry.

  8. What are the typical applications of the STP75NF75FP in power supplies?

    • The STP75NF75FP is commonly used in power supply designs, including DC-DC converters and voltage regulation circuits, due to its high current handling capabilities.

  9. Is the STP75NF75FP suitable for use in industrial control systems?

    • Yes, the STP75NF75FP is well-suited for industrial control systems, offering high reliability and performance in harsh environments.

  10. Are there any recommended heatsinking or thermal management considerations for the STP75NF75FP?

    • It is recommended to use appropriate heatsinking and thermal management techniques to ensure the STP75NF75FP operates within its specified temperature limits, especially in high-power applications.