STMicroelectronics
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TDA7384B

TDA7384B

Product Overview

Category

TDA7384B belongs to the category of integrated circuits (ICs) specifically designed for audio amplification.

Use

The TDA7384B is primarily used in automotive audio systems for amplifying audio signals and driving speakers.

Characteristics

  • High output power capability
  • Low distortion
  • Low noise
  • Short-circuit protection
  • Thermal shutdown protection

Package

The TDA7384B is available in a multiwatt15 package, which is a 15-lead power package suitable for surface mounting.

Essence

The essence of the TDA7384B lies in its ability to provide high-quality audio amplification with low distortion and noise, making it ideal for automotive audio applications.

Packaging/Quantity

The TDA7384B is typically sold in reels or tubes containing a specified quantity of ICs, usually ranging from 50 to 1000 units per package.

Specifications

  • Supply voltage: 8V to 18V
  • Output power: 4 x 40W (max)
  • Total harmonic distortion: < 0.5%
  • Signal-to-noise ratio: > 80dB
  • Operating temperature range: -40°C to +105°C

Detailed Pin Configuration

The TDA7384B has a total of 15 pins, each serving a specific function. The pin configuration is as follows:

  1. Mute/Standby
  2. Input 1
  3. Input 2
  4. Input 3
  5. GND (Ground)
  6. Output 1
  7. Output 2
  8. Output 3
  9. VCC (Supply Voltage)
  10. Output 4
  11. Input 4
  12. Bootstrap
  13. Filter
  14. Feedback
  15. Diagnostic

Functional Features

  • Mute/Standby function for power saving and audio muting
  • Four independent audio inputs for versatile connectivity options
  • Short-circuit protection to prevent damage to the IC and connected speakers
  • Thermal shutdown protection to prevent overheating
  • Diagnostic pin for monitoring the status of the IC

Advantages and Disadvantages

Advantages

  • High output power capability allows for loud and clear audio reproduction.
  • Low distortion ensures accurate sound reproduction.
  • Low noise results in a clean audio signal.
  • Integrated short-circuit and thermal protection enhance reliability and durability.

Disadvantages

  • Limited to automotive audio applications, not suitable for other audio amplification needs.
  • Requires external components for proper operation, increasing overall system complexity.

Working Principles

The TDA7384B operates on the principle of amplifying low-level audio signals received from the input sources. It utilizes internal circuitry to amplify these signals and drive the connected speakers with sufficient power. The IC incorporates various protection mechanisms to ensure safe and reliable operation.

Detailed Application Field Plans

The TDA7384B is primarily designed for use in automotive audio systems, including car stereos, amplifiers, and head units. Its high output power capability and low distortion make it suitable for delivering high-quality audio in vehicles.

Detailed and Complete Alternative Models

  1. TDA7388 - Similar to TDA7384B but with higher output power capability (4 x 45W)
  2. TDA7850 - Offers more channels (4 x 50W) for multi-speaker setups
  3. TDA7560 - Provides additional features like built-in digital volume control and equalization

These alternative models offer similar functionality to the TDA7384B but may have different specifications and pin configurations.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TDA7384B en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TDA7384B in technical solutions:

  1. Q: What is TDA7384B? A: TDA7384B is a 4-channel audio amplifier integrated circuit (IC) commonly used in automotive and other audio applications.

  2. Q: What is the maximum power output of TDA7384B? A: The maximum power output of TDA7384B is typically 45 watts per channel when operating at a 4-ohm load.

  3. Q: Can TDA7384B operate with a lower impedance load? A: Yes, TDA7384B can operate with a minimum load impedance of 2 ohms per channel, but the power output will be reduced.

  4. Q: Does TDA7384B require an external heat sink? A: Yes, TDA7384B requires an external heat sink to dissipate heat generated during operation and ensure proper thermal management.

  5. Q: Can TDA7384B be used in bridged mode? A: No, TDA7384B does not support bridged mode operation. It is designed for use as a 4-channel amplifier.

  6. Q: What is the recommended power supply voltage for TDA7384B? A: The recommended power supply voltage range for TDA7384B is typically between 8V and 18V DC.

  7. Q: Does TDA7384B have built-in protection features? A: Yes, TDA7384B includes various protection features such as over-temperature, short-circuit, and over-voltage protection.

  8. Q: Can TDA7384B be used in conjunction with a microcontroller or DSP? A: Yes, TDA7384B can be controlled and integrated with a microcontroller or DSP to enable advanced audio processing and control functionalities.

  9. Q: What is the recommended PCB layout for TDA7384B? A: The recommended PCB layout for TDA7384B includes proper grounding, decoupling capacitors, and sufficient thermal vias for heat dissipation.

  10. Q: Can TDA7384B drive subwoofers directly? A: Yes, TDA7384B can drive subwoofers directly, but it is recommended to use an external low-pass filter for optimal bass response.

Please note that these answers are general and may vary depending on specific application requirements and manufacturer recommendations.