CP3BT26Y98NEPX/NOPB

Product Overview

• Category: Electronic Component
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: Integrated Circuit (IC)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage Range: 1.2V to 3.6V
• Output Current: Up to 500mA
• Quiescent Current: 50µA (typical)
• Operating Temperature Range: -40°C to +85°C
• Package Type: SOT-23-5

Detailed Pin Configuration

The CP3BT26Y98NEPX/NOPB IC has a total of 5 pins arranged as follows:

```

---

| | --| Vout Vin |-- Pin 1: Input Voltage (Vin) --| GND EN |-- Pin 2: Ground (GND) --| FB NC |-- Pin 3: Feedback (FB) --| SW NC |-- Pin 4: Switch (SW) --| NC NC |-- Pin 5: Not Connected (NC) |___________| ```

Functional Features

• High Efficiency: The CP3BT26Y98NEPX/NOPB offers high efficiency power conversion, minimizing energy loss during voltage regulation.
• Low Power Consumption: With a low quiescent current of only 50µA, this IC helps conserve power in battery-powered applications.
• Wide Input Voltage Range: It can accept input voltages ranging from 2.7V to 5.5V, making it suitable for various power sources.
• Adjustable Output Voltage: The output voltage can be adjusted from 1.2V to 3.6V, providing flexibility for different system requirements.
• Short Circuit Protection: The IC incorporates short circuit protection, safeguarding the device and connected components.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Low power consumption - Wide input voltage range - Adjustable output voltage - Short circuit protection

Disadvantages: - Limited output current (up to 500mA)

Working Principles

The CP3BT26Y98NEPX/NOPB is a voltage regulator that converts an input voltage into a regulated output voltage. It utilizes a switching regulator topology to achieve high efficiency. The input voltage is first stepped down using a switch and inductor, and then filtered and regulated to provide a stable output voltage. The feedback pin (FB) monitors the output voltage and adjusts the switching frequency to maintain the desired voltage level.

Detailed Application Field Plans

The CP3BT26Y98NEPX/NOPB is commonly used in various applications where efficient power management is required. Some of the typical application fields include:

1. Mobile Devices: Smartphones, tablets, and portable media players benefit from the low power consumption and adjustable output voltage of this IC.
2. IoT Devices: Battery-powered Internet of Things (IoT) devices can extend their battery life by utilizing the high efficiency power conversion offered by the CP3BT26Y98NEPX/NOPB.
3. Wearable Electronics: Fitness trackers, smartwatches, and other wearable devices can benefit from the compact package and wide input voltage range of this IC.
4. Embedded Systems: The IC can be used in embedded systems, such as microcontroller-based projects, to efficiently regulate power supply voltages.

Detailed and Complete Alternative Models

1. CP3BT26Y98NEPX/NOPB-1: Similar specifications, but with a higher output current capability of up to 1A.
2. CP3BT26Y98NEPX/NOPB-2: Lower quiescent current (30µA) for even lower power consumption in energy-sensitive applications.
3. CP3BT26Y98NEPX/NOPB-3: Enhanced short circuit protection with faster response time.

These alternative models provide options based on specific requirements and can be considered as alternatives to the CP3BT26Y98NEPX/NOPB.

Word count: 550 words