LM358LVIPWR

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Operational Amplifier
• Characteristics:
  • Low power consumption
  • Wide supply voltage range
  • Rail-to-rail output swing
  • Low input offset voltage
• Package: TSSOP-8
• Essence: High-performance operational amplifier
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: 3V to 32V
• Input Offset Voltage: 2mV (maximum)
• Input Bias Current: 20nA (maximum)
• Gain Bandwidth Product: 1.3MHz (typical)
• Slew Rate: 0.6V/μs (typical)
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The LM358LVIPWR has a TSSOP-8 package with the following pin configuration:

___________ OUT | 1 8 | VCC+ IN- | 2 7 | IN+ IN+ | 3 6 | GND GND | 4 5 | OUT ‾‾‾‾‾‾‾‾‾‾‾‾

Functional Features

• Low power consumption makes it suitable for battery-powered applications.
• Wide supply voltage range allows flexibility in various power supply configurations.
• Rail-to-rail output swing enables maximum utilization of the available voltage range.
• Low input offset voltage ensures accurate signal amplification.

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life. - Wide supply voltage range provides versatility. - Rail-to-rail output swing maximizes signal amplitude. - Low input offset voltage ensures precise amplification.

Disadvantages: - Limited gain bandwidth product may restrict high-frequency applications. - Slew rate may be slower compared to other operational amplifiers. - TSSOP-8 package may require careful handling during assembly.

Working Principles

The LM358LVIPWR is an operational amplifier that amplifies the difference between its two input voltages. It consists of multiple transistors and resistors configured in a way that allows it to provide high gain and accurate amplification. The low power consumption and wide supply voltage range make it suitable for various applications.

Detailed Application Field Plans

The LM358LVIPWR can be used in a wide range of applications, including but not limited to: 1. Audio amplification circuits 2. Sensor signal conditioning 3. Battery-powered devices 4. Signal filtering and buffering 5. Voltage and current measurement circuits

Detailed and Complete Alternative Models

1. LM324: Similar characteristics and pin configuration, but with four operational amplifiers in a single package.
2. LM741: Higher gain bandwidth product and slew rate, but requires dual power supplies.
3. TL072: Dual operational amplifier with higher performance specifications.

Note: This is not an exhaustive list, and there are several alternative models available in the market.

Word count: 346 words