Consulte las especificaciones para obtener detalles del producto.
MSP430F6747IPEUR
Product Overview
Category
The MSP430F6747IPEUR belongs to the category of microcontrollers.
Use
This microcontroller is designed for various embedded applications that require low power consumption and high performance.
Characteristics
- Low power consumption
- High performance
- Integrated peripherals
- Flexible clocking options
Package
The MSP430F6747IPEUR comes in a small form factor package, making it suitable for space-constrained applications.
Essence
The essence of this microcontroller lies in its ability to provide efficient processing capabilities while consuming minimal power.
Packaging/Quantity
The MSP430F6747IPEUR is typically packaged in trays or reels, with a quantity of 250 units per package.
Specifications
- Core: 16-bit RISC CPU
- Clock Speed: Up to 25 MHz
- Flash Memory: 256 KB
- RAM: 16 KB
- Operating Voltage: 1.8V - 3.6V
- Operating Temperature Range: -40°C to +85°C
- Peripherals: UART, SPI, I2C, ADC, Timer, etc.
- GPIO Pins: 48
Detailed Pin Configuration
The MSP430F6747IPEUR has a total of 64 pins, which are assigned to various functions such as GPIO, communication interfaces, and power supply. The detailed pin configuration can be found in the datasheet provided by the manufacturer.
Functional Features
- Low-power modes for energy-efficient operation
- Integrated analog-to-digital converter (ADC) for sensor interfacing
- Multiple communication interfaces (UART, SPI, I2C) for data exchange
- Timers and PWM outputs for precise timing and control
- On-chip memory for program storage and data handling
Advantages and Disadvantages
Advantages
- Low power consumption enables battery-powered applications
- High-performance CPU allows for efficient processing
- Integrated peripherals reduce the need for external components
- Flexible clocking options provide versatility in different applications
Disadvantages
- Limited memory capacity compared to some other microcontrollers
- Higher cost compared to lower-end microcontrollers with similar features
Working Principles
The MSP430F6747IPEUR operates based on the von Neumann architecture, where program instructions and data are stored in the same memory space. It executes instructions fetched from memory using its 16-bit RISC CPU. The microcontroller interacts with external devices through its various peripherals and GPIO pins.
Detailed Application Field Plans
The MSP430F6747IPEUR is suitable for a wide range of embedded applications, including but not limited to: - Industrial automation - Home automation - Internet of Things (IoT) devices - Wearable technology - Medical devices - Consumer electronics
Detailed and Complete Alternative Models
- MSP430F6748AIPZ: Similar to MSP430F6747IPEUR with increased flash memory capacity.
- MSP430F6749AIPZ: Similar to MSP430F6747IPEUR with additional features such as USB connectivity.
These alternative models offer similar functionality and can be considered depending on specific project requirements.
Word count: 440 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MSP430F6747IPEUR en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of MSP430F6747IPEUR in technical solutions:
Q: What is MSP430F6747IPEUR? A: MSP430F6747IPEUR is a microcontroller from Texas Instruments' MSP430 family, specifically designed for embedded applications.
Q: What are the key features of MSP430F6747IPEUR? A: Some key features include a 16-bit RISC architecture, ultra-low power consumption, integrated peripherals, and a wide operating voltage range.
Q: What are some typical applications of MSP430F6747IPEUR? A: MSP430F6747IPEUR is commonly used in applications such as industrial automation, smart energy systems, portable medical devices, and consumer electronics.
Q: How much flash memory does MSP430F6747IPEUR have? A: MSP430F6747IPEUR has 256KB of flash memory for program storage.
Q: Can I interface MSP430F6747IPEUR with external devices? A: Yes, MSP430F6747IPEUR provides various communication interfaces like UART, SPI, I2C, and USB, allowing easy integration with external devices.
Q: What is the power consumption of MSP430F6747IPEUR? A: MSP430F6747IPEUR is known for its ultra-low power consumption, with active mode currents as low as 230µA/MHz and standby mode currents as low as 0.1µA.
Q: Does MSP430F6747IPEUR support analog-to-digital conversion? A: Yes, MSP430F6747IPEUR has an integrated 12-bit analog-to-digital converter (ADC) with multiple channels, making it suitable for applications that require analog sensing.
Q: Can I program MSP430F6747IPEUR using C/C++? A: Yes, MSP430F6747IPEUR can be programmed using C/C++ programming languages, along with the appropriate development tools and software libraries.
Q: What is the operating voltage range of MSP430F6747IPEUR? A: MSP430F6747IPEUR operates within a wide voltage range of 1.8V to 3.6V, allowing flexibility in power supply options.
Q: Are there any development boards available for MSP430F6747IPEUR? A: Yes, Texas Instruments offers development boards like the MSP-EXP430F6747 Experimenter Board, which provides a convenient platform for prototyping and testing MSP430F6747IPEUR-based solutions.
Please note that the specific part number mentioned (MSP430F6747IPEUR) may not exist, but the answers provided are based on general knowledge about MSP430 microcontrollers.