Consulte las especificaciones para obtener detalles del producto.
OPA196IDR - English Editing Encyclopedia Entry
Product Overview
Category: Integrated Circuit (IC)
Use: Operational Amplifier
Characteristics: - High-speed, low-power operational amplifier - Rail-to-rail input and output - Wide supply voltage range - Low input offset voltage and drift - Small package size for space-constrained applications
Package: SOIC (Small Outline Integrated Circuit)
Essence: The OPA196IDR is a high-performance operational amplifier designed for various precision applications.
Packaging/Quantity: Available in reels of 2500 units
Specifications
- Supply Voltage Range: ±1.8V to ±5.5V
- Input Offset Voltage: 150µV (maximum)
- Gain Bandwidth Product: 10MHz
- Slew Rate: 6V/µs
- Input Bias Current: 1pA (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The OPA196IDR has a standard pin configuration with the following connections:
- Non-Inverting Input (+IN)
- Inverting Input (-IN)
- Output (OUT)
- Negative Power Supply (-V)
- Positive Power Supply (+V)
- Null (NC)
- Null (NC)
- Null (NC)
Functional Features
- High-speed amplification of input signals
- Wide operating voltage range allows compatibility with various power supplies
- Rail-to-rail input and output capability enables accurate signal processing near the supply rails
- Low input offset voltage and drift ensure precise amplification of small signals
- Low power consumption for energy-efficient designs
Advantages and Disadvantages
Advantages: - High-speed performance - Wide supply voltage range - Rail-to-rail input and output - Low input offset voltage and drift - Small package size
Disadvantages: - Limited availability in large quantities - Relatively higher cost compared to some alternatives
Working Principles
The OPA196IDR is based on a differential amplifier configuration, which amplifies the voltage difference between its non-inverting and inverting inputs. It utilizes a combination of active devices and feedback circuitry to achieve high gain, low distortion, and accurate signal amplification.
Detailed Application Field Plans
The OPA196IDR is suitable for a wide range of applications, including but not limited to: 1. Precision instrumentation 2. Medical equipment 3. Audio amplification 4. Sensor signal conditioning 5. Data acquisition systems 6. Battery-powered devices 7. Industrial control systems
Detailed and Complete Alternative Models
- OPA197IDR: Similar specifications with enhanced EMI/RFI rejection capabilities.
- OPA198IDR: Higher gain bandwidth product and lower input bias current for more demanding applications.
- OPA199IDR: Ultra-low input bias current and extended temperature range for critical precision designs.
These alternative models offer similar functionality with slight variations to cater to specific application requirements.
Word count: 334 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de OPA196IDR en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of OPA196IDR in technical solutions:
Q: What is OPA196IDR? A: OPA196IDR is a specific model of operational amplifier (op-amp) integrated circuit commonly used in electronic circuits.
Q: What are the key features of OPA196IDR? A: OPA196IDR offers low input offset voltage, low noise, high bandwidth, and rail-to-rail input/output capabilities.
Q: In what applications can OPA196IDR be used? A: OPA196IDR is suitable for various applications such as audio amplifiers, sensor signal conditioning, data acquisition systems, and active filters.
Q: What is the supply voltage range for OPA196IDR? A: OPA196IDR typically operates with a supply voltage range of ±2.25V to ±18V.
Q: What is the input voltage range of OPA196IDR? A: OPA196IDR has a wide input voltage range that extends from the negative supply rail to the positive supply rail.
Q: Can OPA196IDR drive capacitive loads? A: Yes, OPA196IDR is designed to drive capacitive loads up to a certain limit, but it is recommended to consult the datasheet for specific details.
Q: How does OPA196IDR handle temperature variations? A: OPA196IDR has a good temperature stability and can operate within a wide temperature range, typically from -40°C to +125°C.
Q: What is the output current capability of OPA196IDR? A: OPA196IDR can deliver output currents up to a few tens of milliamperes, depending on the load conditions.
Q: Does OPA196IDR require external compensation components? A: No, OPA196IDR is internally compensated and does not require any external compensation components.
Q: Are there any recommended application circuits for OPA196IDR? A: Yes, the datasheet of OPA196IDR provides several recommended application circuits along with design guidelines for different use cases.
Please note that these answers are general and may vary based on specific requirements and circuit configurations. It's always recommended to refer to the datasheet and consult with an experienced engineer for accurate information and guidance.