Consulte las especificaciones para obtener detalles del producto.
OPA2604AUE4
Product Overview
The OPA2604AUE4 is a high-performance, dual operational amplifier designed for audio applications. This precision device offers low noise, high speed, and wide bandwidth, making it suitable for professional audio equipment, high-fidelity audio systems, and instrumentation.
Basic Information
- Category: Operational Amplifier
- Use: Audio applications, professional audio equipment, high-fidelity audio systems, and instrumentation
- Characteristics: Low noise, high speed, wide bandwidth
- Package: SOIC (Small Outline Integrated Circuit)
- Essence: Precision audio amplification
- Packaging/Quantity: Available in reels of 2500 units
Specifications
- Supply Voltage: ±2.5V to ±18V
- Input Offset Voltage: 0.1 mV (max)
- Input Bias Current: 3 nA (max)
- Slew Rate: 20 V/µs
- Gain Bandwidth Product: 45 MHz
- Operating Temperature Range: -40°C to 85°C
Detailed Pin Configuration
The OPA2604AUE4 features a standard 8-pin SOIC package with the following pin configuration: 1. OUT A 2. IN- A 3. IN+ A 4. V- 5. NC (Not Connected) 6. V+ 7. IN+ B 8. IN- B 9. OUT B
Functional Features
- Low distortion: Provides high-quality audio output with minimal distortion.
- High slew rate: Enables rapid response to input signals, preserving signal integrity.
- Wide supply voltage range: Allows flexibility in power supply configurations.
- Unity-gain stable: Suitable for unity-gain buffer applications without external compensation.
Advantages and Disadvantages
Advantages: - High precision and accuracy - Low noise performance - Versatile supply voltage range
Disadvantages: - Relatively higher power consumption compared to some low-power op-amps - Limited to audio and precision instrumentation applications
Working Principles
The OPA2604AUE4 utilizes a combination of high-speed operational amplifier circuitry and precision components to amplify audio signals with minimal distortion and noise. Its internal architecture ensures stability and reliability in various audio applications.
Detailed Application Field Plans
The OPA2604AUE4 is well-suited for the following applications: - Professional audio mixers and preamplifiers - High-fidelity audio amplifiers and receivers - Precision instrumentation and measurement equipment - Audio processing and effects units
Detailed and Complete Alternative Models
- OPA2134: Offers similar audio performance with lower power consumption.
- LM4562: Provides comparable audio quality with enhanced power efficiency.
- NE5532: A cost-effective alternative for general-purpose audio applications.
In conclusion, the OPA2604AUE4 is a high-performance operational amplifier tailored for precision audio amplification in professional and high-fidelity audio systems, offering low noise, high speed, and wide bandwidth characteristics.
Word Count: 443
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de OPA2604AUE4 en soluciones técnicas
What is the OPA2604AUE4?
- The OPA2604AUE4 is a dual operational amplifier with high performance and low noise, suitable for a wide range of technical applications.
What are the key features of the OPA2604AUE4?
- The OPA2604AUE4 features low distortion, low noise, high slew rate, and wide bandwidth, making it ideal for precision audio and signal processing applications.
In what applications can the OPA2604AUE4 be used?
- The OPA2604AUE4 is commonly used in audio amplifiers, active filters, instrumentation amplifiers, and other precision analog circuits.
What is the voltage supply range for the OPA2604AUE4?
- The OPA2604AUE4 operates within a wide voltage supply range, typically between ±5V and ±22V, making it versatile for various power supply configurations.
What is the typical input bias current of the OPA2604AUE4?
- The OPA2604AUE4 has a low input bias current, typically in the range of a few nanoamperes, ensuring minimal impact on signal integrity.
Can the OPA2604AUE4 operate in single-supply applications?
- Yes, the OPA2604AUE4 can be used in single-supply applications with proper biasing and voltage level shifting techniques.
What is the temperature range for the OPA2604AUE4?
- The OPA2604AUE4 is designed to operate over a wide temperature range, typically from -40°C to 125°C, making it suitable for industrial and automotive applications.
Does the OPA2604AUE4 require external compensation?
- No, the OPA2604AUE4 is internally compensated, simplifying circuit design and reducing external component count.
What are the recommended PCB layout considerations for the OPA2604AUE4?
- Proper grounding, decoupling, and thermal management are important for maximizing the performance of the OPA2604AUE4 in PCB layouts.
Where can I find detailed application notes and reference designs for the OPA2604AUE4?
- Texas Instruments provides comprehensive application notes, datasheets, and reference designs for the OPA2604AUE4 on their official website, offering valuable resources for designing with this operational amplifier.