Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TLC272BCDRG4
Ver Detalle Hojas de datos

TLC272BCDRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low-power, Rail-to-Rail Output, Dual Operational Amplifier
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: The TLC272BCDRG4 is a dual operational amplifier designed for low-power applications. It offers rail-to-rail output swing and operates from a single supply voltage as low as 3V.
  • Packaging/Quantity: The TLC272BCDRG4 is available in a reel of 2500 units.

Specifications

  • Supply Voltage Range: 3V to 16V
  • Input Offset Voltage: 2mV (maximum)
  • Input Bias Current: 1pA (typical)
  • Input Offset Current: 1pA (typical)
  • Gain Bandwidth Product: 2.2MHz (typical)
  • Slew Rate: 1.3V/µs (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TLC272BCDRG4 has a total of 8 pins:

  1. Non-Inverting Input (Pin 3)
  2. Inverting Input (Pin 2)
  3. V- (Negative Power Supply)
  4. Output (Pin 6)
  5. V+ (Positive Power Supply)
  6. Output (Pin 7)
  7. Inverting Input (Pin 5)
  8. Non-Inverting Input (Pin 4)

Functional Features

  • Low-power consumption makes it suitable for battery-powered applications.
  • Rail-to-rail output swing allows the amplifier to drive signals close to the power supply rails.
  • Wide supply voltage range enables operation from various power sources.
  • High input impedance minimizes loading effects on the signal source.
  • Low input offset voltage and current ensure accurate amplification.

Advantages and Disadvantages

Advantages: - Low-power consumption - Rail-to-rail output swing - Wide supply voltage range - High input impedance - Accurate amplification

Disadvantages: - Limited gain bandwidth product compared to some other operational amplifiers - Slightly slower slew rate compared to high-speed amplifiers

Working Principles

The TLC272BCDRG4 is based on a differential amplifier configuration. It amplifies the voltage difference between its two input terminals and produces an output voltage proportional to this difference. The rail-to-rail output swing allows the amplifier to provide maximum voltage range without distortion.

Detailed Application Field Plans

The TLC272BCDRG4 is commonly used in various applications, including:

  1. Battery-powered devices: Its low-power consumption makes it ideal for portable electronics such as calculators, remote controls, and medical devices.
  2. Sensor interfaces: The amplifier's rail-to-rail output swing enables accurate amplification of small sensor signals.
  3. Audio amplification: The wide supply voltage range and low distortion make it suitable for audio amplifiers in consumer electronics.
  4. Signal conditioning: The high input impedance and accurate amplification make it useful for conditioning weak signals in measurement systems.

Detailed and Complete Alternative Models

  1. LM358: Dual Operational Amplifier with similar characteristics and pin configuration.
  2. MCP6002: Low-Power, Rail-to-Rail Output, Dual Operational Amplifier with extended temperature range.
  3. TL072: Dual Operational Amplifier with higher gain bandwidth product and faster slew rate.

(Note: This is not an exhaustive list; there are several alternative models available in the market.)

Word count: 455 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TLC272BCDRG4 en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TLC272BCDRG4 in technical solutions:

  1. Q: What is TLC272BCDRG4? A: TLC272BCDRG4 is a dual operational amplifier (op-amp) that is commonly used in various electronic circuits.

  2. Q: What is the supply voltage range for TLC272BCDRG4? A: The supply voltage range for TLC272BCDRG4 is typically between 3V and 16V.

  3. Q: What is the input offset voltage of TLC272BCDRG4? A: The input offset voltage of TLC272BCDRG4 is typically around 2mV.

  4. Q: Can TLC272BCDRG4 operate in single-supply configurations? A: Yes, TLC272BCDRG4 can operate in both single-supply and dual-supply configurations.

  5. Q: What is the maximum output current of TLC272BCDRG4? A: The maximum output current of TLC272BCDRG4 is typically around 20mA.

  6. Q: Is TLC272BCDRG4 suitable for low-power applications? A: Yes, TLC272BCDRG4 is designed for low-power applications and has a low quiescent current consumption.

  7. Q: What is the bandwidth of TLC272BCDRG4? A: The bandwidth of TLC272BCDRG4 is typically around 1MHz.

  8. Q: Can TLC272BCDRG4 be used in audio applications? A: Yes, TLC272BCDRG4 can be used in audio applications such as audio amplifiers and filters.

  9. Q: Does TLC272BCDRG4 have built-in protection features? A: Yes, TLC272BCDRG4 has built-in protection features such as short-circuit protection and thermal shutdown.

  10. Q: What is the package type of TLC272BCDRG4? A: TLC272BCDRG4 is available in an SOIC-8 package, which is a common surface-mount package.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications or application requirements.