Consulte las especificaciones para obtener detalles del producto.
TLV2454AIN
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Low-power, Rail-to-Rail Input/Output (RRIO), Quad Op-Amp
- Package: PDIP (Plastic Dual In-Line Package)
- Essence: TLV2454AIN is a low-power quad operational amplifier designed for general-purpose applications.
- Packaging/Quantity: Available in tubes or reels, with 25 pieces per tube/reel.
Specifications
- Supply Voltage: ±1.8 V to ±6 V
- Input Offset Voltage: 1 mV (maximum)
- Input Bias Current: 1 pA (typical)
- Gain Bandwidth Product: 2.2 MHz (typical)
- Slew Rate: 1.3 V/µs (typical)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The TLV2454AIN has a 14-pin PDIP package with the following pin configuration:
___________
Vcc | 1 14 | Vcc
In1 | 2 13 | Out1
In2 | 3 12 | Out2
In3 | 4 11 | Out3
In4 | 5 10 | Out4
Gnd | 6 9 | NC
Gnd | 7 8 | NC
-----------
Functional Features
- Low-power consumption: TLV2454AIN operates at very low power levels, making it suitable for battery-powered devices.
- Rail-to-Rail Input/Output (RRIO): The op-amp supports input and output signals that can swing close to the supply rails, maximizing dynamic range.
- Quad Op-Amp: The TLV2454AIN contains four independent operational amplifiers in a single package, providing flexibility and space-saving benefits.
Advantages and Disadvantages
Advantages: - Low power consumption extends battery life in portable devices. - RRIO capability allows for wider signal range. - Quad op-amp configuration saves board space and simplifies circuit design.
Disadvantages: - Limited gain bandwidth product compared to higher-end op-amps. - Not suitable for high-frequency applications.
Working Principles
The TLV2454AIN is based on the operational amplifier (op-amp) principle. It amplifies the difference between its two input terminals and produces an output voltage proportional to this difference. The op-amp operates within the specified supply voltage range and provides a high gain with low distortion.
Detailed Application Field Plans
The TLV2454AIN is commonly used in various applications, including but not limited to: - Audio amplification - Sensor signal conditioning - Signal filtering - Voltage and current measurement - Active filters - Data acquisition systems
Alternative Models
Here are some alternative models that can be considered as replacements for TLV2454AIN: - LM324 - MCP6004 - AD8224 - MAX44246
These alternatives offer similar functionality and characteristics, allowing users to choose the most suitable option for their specific requirements.
In conclusion, TLV2454AIN is a low-power quad operational amplifier with rail-to-rail input/output capability. Its compact package, low power consumption, and versatile application range make it a popular choice in various electronic circuits.
Word count: 345
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TLV2454AIN en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of TLV2454AIN in technical solutions:
Q: What is TLV2454AIN? A: TLV2454AIN is a quad operational amplifier (op-amp) with rail-to-rail input/output capability, commonly used in various electronic applications.
Q: What is the supply voltage range for TLV2454AIN? A: The supply voltage range for TLV2454AIN is typically between 2.7V and 6V.
Q: What is the maximum output current TLV2454AIN can provide? A: TLV2454AIN can provide a maximum output current of around 30mA.
Q: Can TLV2454AIN operate at high temperatures? A: Yes, TLV2454AIN has a wide temperature range and can operate reliably at temperatures up to 125°C.
Q: What is the typical gain bandwidth product of TLV2454AIN? A: The typical gain bandwidth product of TLV2454AIN is around 3 MHz.
Q: Is TLV2454AIN suitable for low-power applications? A: Yes, TLV2454AIN is designed for low-power operation and consumes very low quiescent current.
Q: Can TLV2454AIN be used in single-supply applications? A: Yes, TLV2454AIN is specifically designed for single-supply operation and can work with a wide range of voltages.
Q: Does TLV2454AIN have built-in protection features? A: Yes, TLV2454AIN includes built-in features like short-circuit protection and thermal shutdown to ensure safe operation.
Q: What is the input offset voltage of TLV2454AIN? A: The input offset voltage of TLV2454AIN is typically around 1 mV.
Q: Can TLV2454AIN be used in audio applications? A: Yes, TLV2454AIN can be used in audio applications due to its low noise and high output current capability.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.