Consulte las especificaciones para obtener detalles del producto.
TLV2461CDBVT
Product Overview
- Category: Operational Amplifier
- Use: TLV2461CDBVT is a low-power, rail-to-rail input/output operational amplifier designed for general-purpose applications.
- Characteristics: It offers a wide supply voltage range, low quiescent current, and high output drive capability. The device operates from a single 2.7V to 6V supply and can drive loads up to 600Ω. TLV2461CDBVT is known for its low noise and low distortion characteristics, making it suitable for audio applications.
- Package: SOT-23 (DBV) package
- Essence: TLV2461CDBVT is a versatile operational amplifier that provides high performance in a small form factor.
- Packaging/Quantity: Available in tape and reel packaging with 3000 units per reel.
Specifications
- Supply Voltage Range: 2.7V to 6V
- Input Offset Voltage: ±1mV (maximum)
- Input Bias Current: ±1pA (typical)
- Gain Bandwidth Product: 10MHz (typical)
- Slew Rate: 5V/µs (typical)
- Quiescent Current: 900µA (typical)
- Output Drive Capability: 600Ω (typical)
Pin Configuration
The TLV2461CDBVT has the following pin configuration:
___________
OUT | | V+
IN+ | | NC
IN- | | NC
V- | | NC
NC |___________| NC
Functional Features
- Rail-to-rail input and output operation
- Low noise and distortion characteristics
- Wide supply voltage range
- Low quiescent current
- High output drive capability
Advantages and Disadvantages
Advantages: - Versatile operational amplifier suitable for general-purpose applications - Small form factor - Wide supply voltage range allows flexibility in power source selection - Low noise and distortion characteristics make it ideal for audio applications
Disadvantages: - Limited output drive capability compared to some other operational amplifiers - Higher quiescent current compared to some low-power alternatives
Working Principles
TLV2461CDBVT operates as a voltage amplifier, taking an input voltage and amplifying it to produce an output voltage. It utilizes rail-to-rail input and output operation, allowing it to handle signals that span the entire supply voltage range. The device's low noise and distortion characteristics ensure accurate signal reproduction.
Application Field Plans
TLV2461CDBVT finds applications in various fields, including: 1. Audio amplification circuits 2. Sensor signal conditioning 3. Battery-powered devices 4. Portable instrumentation 5. Active filters
Alternative Models
Some alternative models that offer similar functionality to TLV2461CDBVT include: - LM358 - MCP6001 - AD8605 - MAX44246
These models can be considered based on specific application requirements and design constraints.
Word count: 320 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TLV2461CDBVT en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of TLV2461CDBVT in technical solutions:
Q1: What is TLV2461CDBVT? A1: TLV2461CDBVT is a low-power, rail-to-rail input/output operational amplifier (op-amp) manufactured by Texas Instruments.
Q2: What is the supply voltage range for TLV2461CDBVT? A2: The supply voltage range for TLV2461CDBVT is typically between 2.7V and 6V.
Q3: What is the input offset voltage of TLV2461CDBVT? A3: The input offset voltage of TLV2461CDBVT is typically around 1mV.
Q4: What is the input bias current of TLV2461CDBVT? A4: The input bias current of TLV2461CDBVT is typically around 1pA.
Q5: Can TLV2461CDBVT operate with a single power supply? A5: Yes, TLV2461CDBVT can operate with a single power supply as it has rail-to-rail input/output capability.
Q6: What is the gain bandwidth product of TLV2461CDBVT? A6: The gain bandwidth product of TLV2461CDBVT is typically around 1MHz.
Q7: Is TLV2461CDBVT suitable for low-power applications? A7: Yes, TLV2461CDBVT is designed for low-power applications, making it suitable for battery-powered devices.
Q8: Can TLV2461CDBVT be used in precision measurement applications? A8: Yes, TLV2461CDBVT has low input offset voltage and low input bias current, making it suitable for precision measurement applications.
Q9: What is the output voltage swing of TLV2461CDBVT? A9: The output voltage swing of TLV2461CDBVT typically extends to within a few millivolts of the supply rails.
Q10: Can TLV2461CDBVT drive capacitive loads? A10: Yes, TLV2461CDBVT has a high output current capability, allowing it to drive capacitive loads without significant degradation in performance.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.