TLV2464AMDREPG4

Product Overview

• Category: Integrated Circuit (IC)
• Use: Operational Amplifier
• Characteristics: Low-power, Rail-to-Rail Input/Output, Quad Operational Amplifier
• Package: SOIC (Small Outline Integrated Circuit)
• Essence: The TLV2464AMDREPG4 is a quad operational amplifier designed for low-power applications. It offers rail-to-rail input and output capabilities, making it suitable for a wide range of voltage levels.
• Packaging/Quantity: The TLV2464AMDREPG4 comes in a standard SOIC package with a quantity of 250 units per reel.

Specifications

• Supply Voltage: ±1.35 V to ±8 V
• Input Offset Voltage: 1 mV (maximum)
• Input Bias Current: 1 pA (typical)
• Gain Bandwidth Product: 2.8 MHz (typical)
• Slew Rate: 1.6 V/µs (typical)
• Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TLV2464AMDREPG4 has a 14-pin SOIC package with the following pin configuration:

```

---

| | --| V+ Vcc |-- Pin 1: Positive Power Supply --| IN1 OUT1|-- Pin 2: Inverting Input 1 / Output 1 --| IN2 OUT2|-- Pin 3: Inverting Input 2 / Output 2 --| IN3 OUT3|-- Pin 4: Inverting Input 3 / Output 3 --| IN4 OUT4|-- Pin 5: Inverting Input 4 / Output 4 --| OUT4 IN4 |-- Pin 6: Non-Inverting Input 4 --| OUT3 IN3 |-- Pin 7: Non-Inverting Input 3 --| OUT2 IN2 |-- Pin 8: Non-Inverting Input 2 --| OUT1 IN1 |-- Pin 9: Non-Inverting Input 1 --| GND Vee |-- Pin 10: Negative Power Supply |___________| ```

Functional Features

• Low-power consumption for energy-efficient applications.
• Rail-to-rail input and output capabilities allow operation at the full range of supply voltages.
• Quad operational amplifier configuration provides flexibility in circuit design.
• Wide operating temperature range enables usage in various environments.

Advantages and Disadvantages

Advantages: - Low-power consumption helps extend battery life in portable devices. - Rail-to-rail input/output allows for accurate signal amplification even at low voltage levels. - Quad configuration saves board space and reduces component count.

Disadvantages: - Limited gain bandwidth product may not be suitable for high-frequency applications. - Slew rate may limit the amplifier's ability to respond quickly to rapid changes in input signals.

Working Principles

The TLV2464AMDREPG4 is an operational amplifier that amplifies the difference between its two input terminals. It operates by using a feedback mechanism to adjust the output voltage based on the input voltage. The rail-to-rail input/output capability ensures that the amplifier can accurately amplify signals that are close to the power supply rails.

Detailed Application Field Plans

The TLV2464AMDREPG4 is commonly used in various applications, including:

1. Portable audio devices: Provides amplification for headphone outputs, line-level inputs, and microphone inputs.
2. Sensor interfaces: Amplifies small sensor signals for further processing or measurement.
3. Battery-powered systems: Enables efficient signal conditioning and amplification in low-power applications.
4. Industrial control systems: Used for signal conditioning, filtering, and amplification in control circuits.

Detailed and Complete Alternative Models

1. TLV2462A: Dual operational amplifier with similar characteristics to the TLV2464AMDREPG4.
2. TLV2461: Single operational amplifier with rail-to-rail input/output capabilities.
3. TLV2460: Single operational amplifier with low-power consumption.

These alternative models offer different configurations and specifications to suit various application requirements.

Word count: 489 words