Consulte las especificaciones para obtener detalles del producto.
TLV2464CN
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: Low-voltage, Rail-to-Rail Input/Output, Quad Operational Amplifier
- Package: PDIP (Plastic Dual In-Line Package)
- Essence: TLV2464CN is a quad operational amplifier designed for low-voltage applications. It offers rail-to-rail input and output capabilities, making it suitable for various precision measurement and signal conditioning applications.
- Packaging/Quantity: TLV2464CN is available in a 14-pin PDIP package and is typically sold in reels of 2000 units.
Specifications
- Supply Voltage: 2.7V to 6V
- Input Offset Voltage: ±1mV (maximum)
- Input Bias Current: ±1pA (maximum)
- Gain Bandwidth Product: 3MHz
- Slew Rate: 1.6V/µs
- Input Common Mode Voltage Range: Rail-to-Rail
- Output Voltage Swing: Rail-to-Rail
- Quiescent Current: 500µA per amplifier (maximum)
Pin Configuration
The TLV2464CN has a 14-pin PDIP package with the following pin configuration:
___________
| |
1 -| VCC+ VCC- |- 14
2 -| IN1 IN4 |- 13
3 -| IN2 OUT4 |- 12
4 -| IN3 OUT3 |- 11
5 -| OUT1 OUT2 |- 10
6 -| NC NC |- 9
7 -| NC NC |- 8
|___________|
Functional Features
- Low-voltage operation: TLV2464CN operates from a supply voltage as low as 2.7V, making it suitable for battery-powered applications.
- Rail-to-rail input/output: The amplifier's input and output stages can swing close to the supply rails, enabling maximum dynamic range and minimizing distortion.
- Quad operational amplifier: TLV2464CN contains four independent operational amplifiers in a single package, providing flexibility and space-saving benefits.
Advantages and Disadvantages
Advantages: - Low-voltage operation allows for use in battery-powered devices. - Rail-to-rail input/output capability provides enhanced signal fidelity. - Four amplifiers in one package offer cost and space savings.
Disadvantages: - Limited gain bandwidth product compared to some other operational amplifiers. - Higher quiescent current compared to certain low-power op-amps.
Working Principles
The TLV2464CN is based on a CMOS process, which enables low-voltage operation and rail-to-rail input/output capabilities. It utilizes internal compensation techniques to ensure stability and performance across a wide range of operating conditions.
Detailed Application Field Plans
TLV2464CN finds applications in various fields, including but not limited to: 1. Precision measurement instruments 2. Sensor signal conditioning 3. Audio amplification 4. Battery-powered devices 5. Portable medical equipment
Alternative Models
Some alternative models that offer similar functionality to TLV2464CN include: - LM324 - MCP6004 - AD8620
These models can be considered based on specific application requirements and design constraints.
Word count: 314 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TLV2464CN en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of TLV2464CN in technical solutions:
Q: What is TLV2464CN? A: TLV2464CN is a quad operational amplifier (op-amp) IC that is commonly used in various electronic circuits.
Q: What is the supply voltage range for TLV2464CN? A: The supply voltage range for TLV2464CN is typically between 2.7V and 16V.
Q: What is the input voltage range for TLV2464CN? A: The input voltage range for TLV2464CN is typically between the negative supply voltage (V-) and the positive supply voltage (V+).
Q: What is the output voltage swing of TLV2464CN? A: The output voltage swing of TLV2464CN is typically within a few millivolts of the supply rails.
Q: Can TLV2464CN be used in single-supply applications? A: Yes, TLV2464CN can be used in both single-supply and dual-supply applications.
Q: What is the bandwidth of TLV2464CN? A: The bandwidth of TLV2464CN is typically around 3 MHz.
Q: Does TLV2464CN have built-in protection features? A: Yes, TLV2464CN has built-in features like short-circuit protection and thermal shutdown to protect the device from damage.
Q: Can TLV2464CN drive capacitive loads? A: Yes, TLV2464CN can drive capacitive loads up to a certain limit specified in the datasheet.
Q: Is TLV2464CN suitable for precision applications? A: Yes, TLV2464CN is suitable for precision applications due to its low offset voltage and low input bias current.
Q: What are some common applications of TLV2464CN? A: TLV2464CN is commonly used in audio amplifiers, active filters, instrumentation amplifiers, and other general-purpose signal conditioning circuits.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.