Consulte las especificaciones para obtener detalles del producto.
TLV2470AIP
Product Overview
- Category: Integrated Circuit (IC)
- Use: Operational Amplifier
- Characteristics: High-speed, low-power consumption, rail-to-rail input/output, wide supply voltage range
- Package: PDIP (Plastic Dual In-line Package)
- Essence: The TLV2470AIP is a high-performance operational amplifier designed for various applications.
- Packaging/Quantity: Available in tubes of 25 or reels of 2000
Specifications
- Supply Voltage Range: ±1.35 V to ±18 V
- Input Offset Voltage: 500 µV (maximum)
- Input Bias Current: 1 pA (typical)
- Slew Rate: 10 V/µs (typical)
- Gain Bandwidth Product: 10 MHz (typical)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The TLV2470AIP has a standard 8-pin PDIP package with the following pin configuration:
___________
OUT | 1 8 | VCC+
IN- | 2 7 | IN+
IN+ | 3 6 | VCC-
GND | 4 5 | OUT
‾‾‾‾‾‾‾‾‾‾‾‾
Functional Features
- High-speed operation allows for accurate signal amplification in time-critical applications.
- Low-power consumption makes it suitable for battery-powered devices.
- Rail-to-rail input/output capability enables maximum utilization of the supply voltage range.
- Wide supply voltage range provides flexibility in various power supply configurations.
Advantages and Disadvantages
Advantages: - High-speed operation - Low-power consumption - Rail-to-rail input/output - Wide supply voltage range
Disadvantages: - None reported
Working Principles
The TLV2470AIP is based on a differential amplifier configuration, which amplifies the voltage difference between its two input terminals. It utilizes a combination of transistors and resistors to achieve high gain and accurate signal amplification.
Detailed Application Field Plans
The TLV2470AIP can be used in various applications, including but not limited to: 1. Audio amplification circuits 2. Sensor signal conditioning 3. Active filters 4. Data acquisition systems 5. Instrumentation amplifiers
Detailed and Complete Alternative Models
- TLV2471AIP - Single operational amplifier with similar specifications and pin configuration.
- TLV2472AIP - Dual operational amplifier with similar specifications and pin configuration.
- TLV2474AIP - Quad operational amplifier with similar specifications and pin configuration.
These alternative models provide options for different system requirements and configurations.
Note: The above information is subject to change. Please refer to the datasheet for the most up-to-date specifications and details.
Word Count: 314
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TLV2470AIP en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of TLV2470AIP in technical solutions:
Q: What is TLV2470AIP? A: TLV2470AIP is a low-power, rail-to-rail input/output operational amplifier (op-amp) that is commonly used in various electronic circuits.
Q: What is the supply voltage range for TLV2470AIP? A: The supply voltage range for TLV2470AIP is typically between 2.7V and 6V.
Q: What is the typical gain bandwidth product of TLV2470AIP? A: The typical gain bandwidth product of TLV2470AIP is around 10 MHz.
Q: Can TLV2470AIP operate with a single power supply? A: Yes, TLV2470AIP can operate with a single power supply, making it suitable for battery-powered applications.
Q: What is the input offset voltage of TLV2470AIP? A: The input offset voltage of TLV2470AIP is typically very low, around 500 µV.
Q: Is TLV2470AIP suitable for precision applications? A: Yes, TLV2470AIP is suitable for precision applications due to its low input offset voltage and low noise characteristics.
Q: Can TLV2470AIP drive capacitive loads? A: Yes, TLV2470AIP has a high output current capability, allowing it to drive capacitive loads without significant degradation in performance.
Q: What is the temperature range for TLV2470AIP? A: TLV2470AIP is designed to operate over a wide temperature range, typically between -40°C and 125°C.
Q: Can TLV2470AIP be used in audio applications? A: Yes, TLV2470AIP can be used in audio applications due to its low distortion and high output current capability.
Q: Are there any recommended application circuits for TLV2470AIP? A: Yes, the datasheet of TLV2470AIP provides several recommended application circuits, including voltage followers, active filters, and instrumentation amplifiers.
Please note that these answers are general and may vary depending on specific design requirements and conditions. It is always recommended to refer to the datasheet and consult with an experienced engineer for detailed application-specific information.