Consulte las especificaciones para obtener detalles del producto.
TLV274QDRG4Q1
Product Overview
Category: Integrated Circuits (ICs)
Use: TLV274QDRG4Q1 is a quad operational amplifier designed for automotive applications. It is specifically tailored to meet the stringent requirements of the automotive industry, including high reliability and robustness.
Characteristics: - Low offset voltage - Low input bias current - Rail-to-rail output swing - Wide supply voltage range - High common-mode rejection ratio (CMRR) - Low noise
Package: TLV274QDRG4Q1 comes in a small outline package (SOIC) with 14 pins.
Essence: This IC is an essential component in automotive electronics, providing amplification and signal conditioning capabilities.
Packaging/Quantity: TLV274QDRG4Q1 is typically sold in reels of 2500 units.
Specifications
- Supply Voltage Range: 2.7V to 16V
- Input Offset Voltage: ±1mV (maximum)
- Input Bias Current: ±1pA (maximum)
- Output Current: ±20mA (maximum)
- Gain Bandwidth Product: 10MHz (typical)
- Slew Rate: 3.5V/µs (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The TLV274QDRG4Q1 has 14 pins arranged as follows:
Pin 1: Non-Inverting Input A
Pin 2: Inverting Input A
Pin 3: V-
Pin 4: Non-Inverting Input B
Pin 5: Inverting Input B
Pin 6: Output B
Pin 7: V+
Pin 8: Output A
Pin 9: Inverting Input D
Pin 10: Non-Inverting Input D
Pin 11: VCC
Pin 12: Output D
Pin 13: Inverting Input C
Pin 14: Non-Inverting Input C
Functional Features
- High precision amplification of signals in automotive applications.
- Wide supply voltage range allows for compatibility with various power sources.
- Rail-to-rail output swing enables maximum utilization of the available voltage range.
- Low noise ensures accurate signal processing.
- High CMRR minimizes common-mode interference.
Advantages and Disadvantages
Advantages: - Designed specifically for automotive applications, ensuring high reliability. - Low offset voltage and input bias current enhance accuracy. - Wide supply voltage range provides flexibility in system design. - Rail-to-rail output swing maximizes signal integrity. - High CMRR reduces common-mode noise.
Disadvantages: - Limited availability in small quantities for non-automotive applications. - Relatively higher cost compared to general-purpose operational amplifiers.
Working Principles
TLV274QDRG4Q1 is a quad operational amplifier that operates based on the principles of differential amplification. It amplifies the difference between the voltages at its non-inverting and inverting inputs, producing an amplified output signal. The IC utilizes internal circuitry to achieve low offset voltage, low input bias current, and high CMRR.
Detailed Application Field Plans
The TLV274QDRG4Q1 is widely used in various automotive applications, including: - Engine control units (ECUs) - Powertrain systems - Safety systems (airbags, ABS) - Infotainment systems - Lighting control modules - Climate control systems
Its high reliability, robustness, and automotive-specific features make it suitable for these critical applications.
Detailed and Complete Alternative Models
- TLV274QDRG4: Similar to TLV274QDRG4Q1, but without the automotive-specific qualification.
- TLV274IDR: SOIC package with 14 pins, suitable for general-purpose applications.
- TLV274CDR: Smaller SOIC package with 14 pins, suitable for space-constrained designs.
- TLV274IPWR: TSSOP package with 14 pins, offering a different form factor option.
These alternative models provide flexibility in choosing the most suitable operational amplifier for specific requirements.
Word count: 445 words
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TLV274QDRG4Q1 en soluciones técnicas
Sure! Here are 10 common questions and answers related to the application of TLV274QDRG4Q1 in technical solutions:
1. What is TLV274QDRG4Q1? TLV274QDRG4Q1 is a quad operational amplifier (op-amp) designed for automotive applications. It offers low power consumption, rail-to-rail input/output, and high output current drive capability.
2. What are the key features of TLV274QDRG4Q1? The key features of TLV274QDRG4Q1 include low supply current, wide operating voltage range, low input offset voltage, and excellent noise performance.
3. What are the typical applications of TLV274QDRG4Q1? TLV274QDRG4Q1 can be used in various automotive applications such as sensor interfaces, signal conditioning, motor control, and audio amplification.
4. What is the supply voltage range for TLV274QDRG4Q1? TLV274QDRG4Q1 operates from a single supply voltage ranging from 2.7V to 16V.
5. What is the input voltage range of TLV274QDRG4Q1? The input voltage range of TLV274QDRG4Q1 extends from the negative supply voltage (V-) to the positive supply voltage (V+).
6. What is the output voltage swing of TLV274QDRG4Q1? TLV274QDRG4Q1 provides rail-to-rail output voltage swing, which means it can drive signals close to both the positive and negative supply rails.
7. Does TLV274QDRG4Q1 have built-in protection features? Yes, TLV274QDRG4Q1 includes built-in protection features such as short-circuit protection and thermal shutdown.
8. What is the maximum output current of TLV274QDRG4Q1? TLV274QDRG4Q1 can deliver a maximum output current of 40mA per channel.
9. Is TLV274QDRG4Q1 suitable for automotive temperature ranges? Yes, TLV274QDRG4Q1 is designed to operate over the automotive temperature range of -40°C to +125°C.
10. Are there any recommended application circuits available for TLV274QDRG4Q1? Yes, Texas Instruments provides application notes and reference designs that showcase various circuit configurations using TLV274QDRG4Q1 for different applications.
Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.