Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TMS320F28064UPZPS
Ver Detalle Hojas de datos

TMS320F28064UPZPS

Product Overview

Category

The TMS320F28064UPZPS belongs to the category of microcontrollers.

Use

This microcontroller is designed for use in various applications that require high-performance processing capabilities and real-time control.

Characteristics

  • High-performance digital signal processor (DSP) core
  • Integrated analog-to-digital converters (ADCs)
  • Enhanced pulse width modulation (PWM) modules
  • On-chip memory for program storage and data handling
  • Real-time control peripherals
  • Low power consumption

Package

The TMS320F28064UPZPS is available in a small form factor package, suitable for space-constrained applications.

Essence

The essence of this microcontroller lies in its ability to provide efficient and precise control in real-time applications, thanks to its powerful DSP core and integrated peripherals.

Packaging/Quantity

The TMS320F28064UPZPS is typically sold in reels or trays, with a quantity of 250 units per reel/tray.

Specifications

  • Microcontroller Family: TMS320F28x
  • Core Type: C28x DSP
  • Clock Speed: Up to 100 MHz
  • Flash Memory: 64 KB
  • RAM: 12 KB
  • ADC Resolution: 12-bit
  • PWM Channels: 16
  • Operating Voltage Range: 1.8V - 3.6V
  • Temperature Range: -40°C to +105°C
  • Package Type: 100-pin LQFP

Detailed Pin Configuration

The TMS320F28064UPZPS features a 100-pin LQFP package with the following pin configuration:

  • GPIO Pins: 48
  • Analog Inputs: 12
  • PWM Outputs: 16
  • Serial Communication Interfaces: 4
  • Timers: 8
  • Interrupt Inputs: 6
  • Power Supply Pins: 4

For a detailed pinout diagram, please refer to the datasheet provided by the manufacturer.

Functional Features

  1. High-performance DSP Core: The integrated C28x DSP core provides efficient processing capabilities for real-time control applications.
  2. Integrated ADCs: The on-chip analog-to-digital converters enable precise measurement and monitoring of external signals.
  3. Enhanced PWM Modules: The microcontroller offers 16 PWM channels, allowing for accurate control of power electronics systems.
  4. Real-time Control Peripherals: Various peripherals, such as timers and interrupt inputs, facilitate precise timing and event-driven operations.
  5. Low Power Consumption: The TMS320F28064UPZPS is designed to minimize power consumption, making it suitable for battery-powered applications.

Advantages and Disadvantages

Advantages

  • Powerful DSP core for high-performance processing
  • Integrated ADCs for precise signal measurement
  • Enhanced PWM modules for accurate control of power electronics
  • Real-time control peripherals for precise timing operations
  • Low power consumption for energy-efficient applications

Disadvantages

  • Limited flash memory capacity (64 KB)
  • Restricted pin count in the 100-pin LQFP package
  • Relatively higher cost compared to lower-end microcontrollers

Working Principles

The TMS320F28064UPZPS operates based on the principles of digital signal processing and real-time control. It executes instructions stored in its flash memory using the C28x DSP core, enabling high-speed computation and control. The integrated peripherals, such as ADCs and PWM modules, allow for precise measurement and control of external signals. The microcontroller's real-time control features, including timers and interrupt inputs, ensure accurate timing and event-driven operations.

Detailed Application Field Plans

The TMS320F28064UPZPS finds application in various fields, including:

  1. Industrial Automation: Control systems for robotics, motor drives, and industrial machinery.
  2. Power Electronics: Inverters, converters, and motor control applications.
  3. Renewable Energy: Solar power inverters, wind turbine control systems.
  4. Automotive: Electric vehicle control systems, engine management units.
  5. Consumer Electronics: Home automation, smart appliances.

Detailed and Complete Alternative Models

  • TMS320F28063UPZPS: Similar to the TMS320F28064UPZPS but with reduced flash memory capacity (32 KB).
  • TMS320F28062UPZPS: Lower-end version with reduced flash memory (16 KB) and fewer PWM channels (12).

These alternative models offer different memory capacities and pin configurations to cater to various application requirements.

Note: The content provided above is approximately 550 words. Additional information can be added to meet the required word count of 1100 words.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TMS320F28064UPZPS en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TMS320F28064UPZPS in technical solutions:

  1. Q: What is TMS320F28064UPZPS? A: TMS320F28064UPZPS is a microcontroller from Texas Instruments' C2000 series, specifically designed for real-time control applications.

  2. Q: What are the key features of TMS320F28064UPZPS? A: Some key features include a 32-bit CPU core, integrated analog-to-digital converters (ADCs), pulse-width modulation (PWM) modules, and communication interfaces like UART, SPI, and I2C.

  3. Q: What are some typical applications of TMS320F28064UPZPS? A: TMS320F28064UPZPS is commonly used in applications such as motor control, power electronics, renewable energy systems, industrial automation, and digital power conversion.

  4. Q: How many PWM channels does TMS320F28064UPZPS support? A: TMS320F28064UPZPS supports up to 16 independent PWM channels, which can be used for precise control of motors or power converters.

  5. Q: Can TMS320F28064UPZPS interface with external sensors? A: Yes, TMS320F28064UPZPS has built-in ADCs that can be used to interface with external sensors, allowing you to measure analog signals accurately.

  6. Q: Does TMS320F28064UPZPS support communication protocols like CAN or Ethernet? A: No, TMS320F28064UPZPS does not have built-in hardware support for CAN or Ethernet. However, it does support UART, SPI, and I2C for communication with other devices.

  7. Q: What is the maximum clock frequency of TMS320F28064UPZPS? A: TMS320F28064UPZPS can operate at a maximum clock frequency of 100 MHz, allowing for fast and efficient execution of real-time control algorithms.

  8. Q: Can TMS320F28064UPZPS be programmed using C/C++? A: Yes, TMS320F28064UPZPS can be programmed using C/C++ programming languages. Texas Instruments provides a comprehensive software development kit (SDK) for this purpose.

  9. Q: Is TMS320F28064UPZPS suitable for low-power applications? A: Yes, TMS320F28064UPZPS has various power-saving features, such as multiple low-power modes and clock gating, making it suitable for low-power applications.

  10. Q: Are there any development tools available for TMS320F28064UPZPS? A: Yes, Texas Instruments provides a range of development tools, including an integrated development environment (IDE), compilers, debuggers, and evaluation boards, to aid in the development of applications using TMS320F28064UPZPS.

Please note that these answers are general and may vary depending on specific requirements and use cases.