Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TMS320F28067UPNT
Ver Detalle Hojas de datos

TMS320F28067UPNT

Product Overview

Category

TMS320F28067UPNT belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various applications that require high-performance real-time control, such as industrial automation, motor control, and power electronics.

Characteristics

  • High-performance 32-bit RISC CPU
  • Integrated peripherals for control applications
  • Enhanced control law accelerator (CLA)
  • On-chip memory and flash storage
  • Low-power consumption
  • Real-time interrupt handling capability

Package

TMS320F28067UPNT is available in a small form factor package, making it suitable for space-constrained applications. The package type is typically LQFP (Low Profile Quad Flat Package).

Essence

The essence of TMS320F28067UPNT lies in its ability to provide efficient and reliable real-time control solutions for a wide range of applications.

Packaging/Quantity

This microcontroller is usually packaged in reels or trays, with a typical quantity of 250 units per reel/tray.

Specifications

  • CPU: 32-bit C28x core running at up to 100 MHz
  • Memory: 256 KB Flash, 100 KB RAM
  • Operating Voltage: 3.3 V
  • ADC Resolution: 12-bit, up to 16 channels
  • PWM Outputs: Up to 16
  • Communication Interfaces: UART, SPI, I2C, CAN
  • Timers: Multiple 32-bit timers
  • Operating Temperature Range: -40°C to +105°C

Detailed Pin Configuration

The TMS320F28067UPNT microcontroller has a total of 100 pins. The pin configuration is as follows:

  • GPIO Pins: 64
  • Analog Input Pins: 16
  • PWM Output Pins: 16
  • Communication Interface Pins: Varies (UART, SPI, I2C, CAN)
  • Power Supply Pins: VDD, VSS

For a detailed pinout diagram and pin functions, refer to the product datasheet.

Functional Features

1. High-Performance CPU

The TMS320F28067UPNT is equipped with a powerful 32-bit C28x core, capable of executing complex control algorithms with high precision and speed.

2. Enhanced Control Law Accelerator (CLA)

The integrated CLA provides additional processing power for real-time control tasks, offloading the main CPU and enabling parallel execution of control algorithms.

3. Integrated Peripherals

This microcontroller offers a wide range of integrated peripherals, including ADCs, PWM modules, communication interfaces, and timers, facilitating seamless integration into various control systems.

4. Real-Time Interrupt Handling

TMS320F28067UPNT features efficient interrupt handling mechanisms, ensuring timely response to critical events and enabling precise control in time-sensitive applications.

Advantages and Disadvantages

Advantages

  • High-performance CPU and CLA for efficient real-time control
  • Integrated peripherals reduce external component count and simplify system design
  • Low-power consumption for energy-efficient applications
  • Wide operating temperature range allows usage in harsh environments

Disadvantages

  • Limited memory capacity compared to some other microcontrollers in the same category
  • Higher cost compared to lower-end microcontrollers for less demanding applications

Working Principles

The TMS320F28067UPNT operates based on the principles of digital signal processing and real-time control. It executes control algorithms stored in its flash memory, utilizing the integrated peripherals and processing capabilities to perform precise control actions in real-time.

Detailed Application Field Plans

TMS320F28067UPNT finds extensive application in the following fields:

  1. Industrial Automation: Used in programmable logic controllers (PLCs), motor control systems, and robotics for precise control of industrial processes.
  2. Power Electronics: Employed in power converters, inverters, and uninterruptible power supplies (UPS) to regulate and control electrical power.
  3. Automotive Systems: Integrated into automotive control units for applications like engine management, electric power steering, and advanced driver-assistance systems (ADAS).
  4. Renewable Energy: Utilized in solar inverters and wind turbine control systems to optimize energy conversion and grid integration.

Detailed and Complete Alternative Models

  • TMS320F28066UPNT
  • TMS320F28068UPNT
  • TMS320F28069UPNT

These alternative models offer similar features and performance but may have variations in memory capacity, pin count, or peripheral options.

In conclusion, the TMS320F28067UPNT microcontroller is a high-performance device designed for real-time control applications. With its powerful CPU, integrated peripherals, and efficient interrupt handling, it provides reliable and precise control solutions for various industries. While it has some limitations in terms of memory capacity and cost, it offers significant advantages in terms of performance and functionality

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TMS320F28067UPNT en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TMS320F28067UPNT in technical solutions:

  1. Q: What is TMS320F28067UPNT? A: TMS320F28067UPNT is a microcontroller from Texas Instruments' C2000™ real-time control series, specifically designed for high-performance applications.

  2. Q: What are the key features of TMS320F28067UPNT? A: Some key features include a 32-bit CPU, integrated analog-to-digital converters (ADCs), pulse-width modulation (PWM) modules, serial communication interfaces, and on-chip memory.

  3. Q: What are some typical applications of TMS320F28067UPNT? A: TMS320F28067UPNT is commonly used in applications such as motor control, power electronics, renewable energy systems, industrial automation, and digital power conversion.

  4. Q: How does TMS320F28067UPNT support motor control applications? A: The microcontroller provides advanced PWM modules, position sensing interfaces, and control algorithms that enable precise and efficient motor control.

  5. Q: Can TMS320F28067UPNT handle multiple communication protocols? A: Yes, it supports various communication protocols like UART, SPI, I2C, CAN, and Ethernet, making it suitable for interfacing with other devices or systems.

  6. Q: Does TMS320F28067UPNT have built-in safety features? A: Yes, it includes hardware-based safety features like cyclic redundancy check (CRC), memory protection, and watchdog timers to enhance system reliability.

  7. Q: How can TMS320F28067UPNT be programmed? A: It can be programmed using Texas Instruments' Code Composer Studio™ integrated development environment (IDE) or other compatible software tools.

  8. Q: Can TMS320F28067UPNT be used in low-power applications? A: Yes, it offers power-saving modes and features like standby mode, idle mode, and clock gating to minimize power consumption in low-power applications.

  9. Q: Is TMS320F28067UPNT suitable for real-time control applications? A: Absolutely, it is designed for real-time control with its fast interrupt response, deterministic execution, and high-speed peripherals.

  10. Q: Are there any development resources available for TMS320F28067UPNT? A: Yes, Texas Instruments provides comprehensive documentation, application notes, reference designs, and a supportive online community for developers working with TMS320F28067UPNT.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases.