Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TPS3606-33DGSR
Ver Detalle Hojas de datos

TPS3606-33DGSR

Product Overview

Category

The TPS3606-33DGSR belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

The TPS3606-33DGSR comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

The TPS3606-33DGSR is typically packaged in reels, with each reel containing a specific quantity of units.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage: 3.3V
  • Output Current: Up to 1A
  • Dropout Voltage: 200mV (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TPS3606-33DGSR has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range allows for versatile applications.
  • Low dropout voltage ensures efficient power conversion.
  • Enable pin provides control over the regulator's operation.
  • Feedback pin enables precise voltage regulation.
  • Overcurrent and thermal protection features enhance reliability.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power dissipation.
  • Small form factor saves space in electronic designs.
  • Wide input voltage range accommodates various power sources.
  • Overcurrent and thermal protection enhance system reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Lack of adjustable output voltage limits flexibility in certain designs.

Working Principles

The TPS3606-33DGSR operates based on a linear voltage regulation principle. It takes an input voltage within the specified range and regulates it to a stable 3.3V output using internal circuitry. The feedback pin continuously monitors the output voltage and adjusts the internal components to maintain the desired voltage level.

Detailed Application Field Plans

The TPS3606-33DGSR finds applications in various electronic systems, including but not limited to: 1. Battery-powered devices 2. Portable consumer electronics 3. Industrial control systems 4. Automotive electronics 5. Communication equipment

Detailed and Complete Alternative Models

  1. TPS3606-33DGS: Similar to TPS3606-33DGSR but without the enable pin.
  2. TPS3606-33DGK: Package variant with different pin configuration.
  3. TPS3606-33DGN: Alternate package variant with improved thermal performance.

These alternative models offer similar voltage regulation capabilities and can be used as substitutes for the TPS3606-33DGSR in specific applications.

Word count: 399 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TPS3606-33DGSR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TPS3606-33DGSR in technical solutions:

  1. Q: What is TPS3606-33DGSR? A: TPS3606-33DGSR is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 3.3V.

  2. Q: What are the typical applications of TPS3606-33DGSR? A: TPS3606-33DGSR is commonly used in various technical solutions, such as power management for microcontrollers, sensors, and other low-power devices.

  3. Q: What is the input voltage range supported by TPS3606-33DGSR? A: TPS3606-33DGSR can accept input voltages ranging from 2.7V to 5.5V.

  4. Q: What is the maximum output current that TPS3606-33DGSR can provide? A: TPS3606-33DGSR can deliver a maximum output current of 150mA.

  5. Q: Does TPS3606-33DGSR require any external components for operation? A: Yes, TPS3606-33DGSR requires a few external components like input/output capacitors and resistors for stability and filtering.

  6. Q: Can TPS3606-33DGSR handle overvoltage or reverse polarity protection? A: No, TPS3606-33DGSR does not have built-in overvoltage or reverse polarity protection. Additional external protection circuits may be required.

  7. Q: Is TPS3606-33DGSR suitable for battery-powered applications? A: Yes, TPS3606-33DGSR is well-suited for battery-powered applications due to its low quiescent current and wide input voltage range.

  8. Q: What is the operating temperature range of TPS3606-33DGSR? A: TPS3606-33DGSR can operate within a temperature range of -40°C to +125°C.

  9. Q: Can TPS3606-33DGSR be used in automotive applications? A: Yes, TPS3606-33DGSR is automotive-grade and can be used in automotive applications that fall within its specified operating conditions.

  10. Q: Are there any recommended layout guidelines for using TPS3606-33DGSR? A: Yes, Texas Instruments provides layout guidelines in the datasheet of TPS3606-33DGSR, which should be followed to ensure proper performance and stability.

Please note that these answers are general and may vary depending on specific design requirements and application scenarios. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.