Consulte las especificaciones para obtener detalles del producto.
TPS3836E18DBVTG4
Introduction
The TPS3836E18DBVTG4 is a voltage supervisor belonging to the category of integrated circuits. It is commonly used in electronic systems to monitor the power supply voltage and ensure proper system operation. This entry provides an overview of the TPS3836E18DBVTG4, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Integrated Circuits
- Use: Voltage Supervisor
- Characteristics: Precision monitoring, low power consumption
- Package: SOT-23 (DBV)
- Essence: Voltage monitoring and reset generation
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Voltage Threshold: 1.8V
- Accuracy: ±1.5%
- Supply Current: 3 µA
- Operating Temperature Range: -40°C to 125°C
- Output Type: Active-Low, Open-Drain
Detailed Pin Configuration
The TPS3836E18DBVTG4 has three pins: 1. VDD: Power supply input 2. GND: Ground connection 3. RESET: Output signal indicating the monitored voltage status
Functional Features
- Precision Monitoring: Accurately monitors the power supply voltage.
- Low Power Consumption: Consumes minimal current, suitable for battery-powered applications.
- Manual Reset Input: Allows external control of the reset function.
Advantages and Disadvantages
Advantages
- Precise voltage monitoring
- Low power consumption
- Small package size
- Wide operating temperature range
Disadvantages
- Limited to monitoring single voltage threshold
- Requires external components for some applications
Working Principles
The TPS3836E18DBVTG4 operates by comparing the monitored voltage with the preset threshold. When the voltage falls below the threshold, the reset output is activated, indicating a fault condition. The device continuously monitors the voltage and keeps the reset output active until the voltage rises above the threshold.
Detailed Application Field Plans
The TPS3836E18DBVTG4 is widely used in various applications, including: - Battery-Powered Devices - Embedded Systems - Industrial Control Systems - Automotive Electronics - Consumer Electronics
Detailed and Complete Alternative Models
Some alternative models to TPS3836E18DBVTG4 include: - TPS3808G01 - MAX823 - ADM811
In conclusion, the TPS3836E18DBVTG4 is a precision voltage supervisor with low power consumption, making it suitable for a wide range of electronic systems. Its compact package and precise monitoring capabilities make it a popular choice in various applications.
[Word Count: 409]
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TPS3836E18DBVTG4 en soluciones técnicas
What is the operating voltage range of TPS3836E18DBVTG4?
- The operating voltage range of TPS3836E18DBVTG4 is 0.9V to 10V.
What is the typical hysteresis of TPS3836E18DBVTG4?
- The typical hysteresis of TPS3836E18DBVTG4 is 20mV.
What is the quiescent current consumption of TPS3836E18DBVTG4?
- The quiescent current consumption of TPS3836E18DBVTG4 is typically 1.5µA.
What is the temperature range for TPS3836E18DBVTG4?
- TPS3836E18DBVTG4 operates within a temperature range of -40°C to 125°C.
What is the output type of TPS3836E18DBVTG4?
- TPS3836E18DBVTG4 has an open-drain output type.
What is the reset threshold voltage of TPS3836E18DBVTG4?
- The reset threshold voltage of TPS3836E18DBVTG4 is 1.8V.
Does TPS3836E18DBVTG4 have a manual reset input?
- No, TPS3836E18DBVTG4 does not have a manual reset input.
What is the package type of TPS3836E18DBVTG4?
- TPS3836E18DBVTG4 comes in a SOT-23 package.
Is TPS3836E18DBVTG4 suitable for battery-powered applications?
- Yes, TPS3836E18DBVTG4 is suitable for battery-powered applications due to its low quiescent current.
What are some common applications for TPS3836E18DBVTG4?
- TPS3836E18DBVTG4 is commonly used in microcontroller-based systems, portable electronics, and battery-powered devices for voltage monitoring and reset functions.