Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TPS54628DDA
Ver Detalle Hojas de datos

TPS54628DDA

Product Overview

Category

The TPS54628DDA belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Wide input voltage range
  • Low output voltage ripple
  • Fast transient response

Package

The TPS54628DDA comes in a small outline package (SOP) with 8 pins.

Essence

The essence of the TPS54628DDA is its ability to efficiently regulate voltage in various electronic applications.

Packaging/Quantity

The TPS54628DDA is typically packaged in reels and is available in quantities of 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 17V
  • Output Voltage Range: 0.6V to 6V
  • Output Current: Up to 6A
  • Switching Frequency: 300kHz to 2.2MHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. PGND: Power ground pin
  3. SW: Switching node pin
  4. FB: Feedback voltage pin
  5. EN: Enable pin
  6. SS/TR: Soft-start/Tracking pin
  7. VOUT: Output voltage pin
  8. PGND: Power ground pin

Functional Features

  • Integrated power MOSFETs
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Enable/disable control

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power dissipation
  • Wide input voltage range allows for versatile applications
  • Low output voltage ripple ensures stable operation of downstream components
  • Fast transient response enables quick load changes without significant voltage fluctuations

Disadvantages

  • Relatively high cost compared to traditional linear regulators
  • Requires additional external components for proper operation

Working Principles

The TPS54628DDA operates on the principle of pulse width modulation (PWM). It uses a feedback mechanism to continuously monitor and adjust the output voltage based on the desired setpoint. The integrated power MOSFETs switch on and off rapidly to regulate the output voltage by controlling the duty cycle of the PWM signal.

Detailed Application Field Plans

The TPS54628DDA is commonly used in various applications, including: 1. Power supplies for computer peripherals 2. Industrial automation systems 3. Telecommunications equipment 4. Automotive electronics 5. Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the TPS54628DDA include: 1. LM2596: A popular buck converter with adjustable output voltage. 2. LT1763: Low dropout linear regulator suitable for low noise applications. 3. LM317: Adjustable positive voltage regulator with a wide input voltage range.

These alternative models can be considered based on specific application requirements and design constraints.

Word count: 386 words

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TPS54628DDA en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TPS54628DDA in technical solutions:

  1. Q: What is TPS54628DDA? A: TPS54628DDA is a synchronous buck DC-DC converter integrated circuit (IC) that provides high-efficiency power conversion for various applications.

  2. Q: What is the input voltage range of TPS54628DDA? A: The input voltage range of TPS54628DDA is typically between 4.5V and 17V.

  3. Q: What is the output voltage range of TPS54628DDA? A: The output voltage range of TPS54628DDA can be adjusted from 0.6V to 5.5V using external resistors.

  4. Q: What is the maximum output current of TPS54628DDA? A: TPS54628DDA can deliver a maximum output current of up to 6A.

  5. Q: What is the efficiency of TPS54628DDA? A: TPS54628DDA offers high efficiency, typically above 90%, depending on the input and output voltage conditions.

  6. Q: Does TPS54628DDA have built-in protection features? A: Yes, TPS54628DDA includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  7. Q: Can TPS54628DDA operate in a wide temperature range? A: Yes, TPS54628DDA is designed to operate in a wide temperature range, typically from -40°C to 125°C.

  8. Q: Is TPS54628DDA suitable for battery-powered applications? A: Yes, TPS54628DDA is suitable for battery-powered applications as it supports a wide input voltage range and offers high efficiency.

  9. Q: Can TPS54628DDA be used in automotive applications? A: Yes, TPS54628DDA is qualified for automotive applications and meets the necessary standards and requirements.

  10. Q: What are some typical applications of TPS54628DDA? A: TPS54628DDA can be used in various applications such as industrial equipment, telecommunications, consumer electronics, and automotive systems where efficient power conversion is required.

Please note that the answers provided here are general and may vary depending on specific design considerations and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information and application-specific guidance.