Texas Instruments
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
TPS61281AYFFR
Ver Detalle Hojas de datos

TPS61281AYFFR

Product Overview

Category

The TPS61281AYFFR belongs to the category of integrated circuits (ICs) and specifically falls under the voltage regulators - switching regulators classification.

Use

This product is primarily used for power management applications, where it efficiently steps up input voltages to a higher output voltage level. It is commonly employed in portable electronic devices, such as smartphones, tablets, and wearable devices.

Characteristics

  • High efficiency: The TPS61281AYFFR offers high conversion efficiency, ensuring minimal power loss during voltage conversion.
  • Wide input voltage range: It can accept input voltages ranging from 2.3V to 5.5V, making it compatible with various power sources.
  • Adjustable output voltage: The output voltage can be adjusted within a specific range, allowing flexibility in meeting different device requirements.
  • Low quiescent current: The device exhibits low standby current consumption, contributing to extended battery life in portable applications.

Package

The TPS61281AYFFR is available in a small form factor package known as a 20-pin wafer-level chip scale package (WLCSP). This package offers a compact size and facilitates easy integration into space-constrained designs.

Essence

The essence of the TPS61281AYFFR lies in its ability to efficiently step up input voltages, providing a stable and regulated output voltage suitable for powering various electronic devices.

Packaging/Quantity

The TPS61281AYFFR is typically supplied in reels, with each reel containing a specified quantity of ICs. The exact quantity per reel may vary depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.3V to 5.5V
  • Output Voltage Range: Adjustable within a specific range (e.g., 2.5V to 5.5V)
  • Output Current: Up to 1.2A
  • Switching Frequency: Adjustable (e.g., 1.2MHz to 2.4MHz)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TPS61281AYFFR features a 20-pin WLCSP package with the following pin configuration:

  1. VIN: Input voltage pin
  2. EN: Enable pin
  3. PG: Power good indicator pin
  4. FB: Feedback pin for output voltage regulation
  5. VOUT: Output voltage pin
  6. SW: Switching node pin
  7. GND: Ground pin
  8. ...

(Note: Please refer to the product datasheet for the complete pin configuration.)

Functional Features

  • High efficiency voltage conversion
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft start functionality
  • Power good indicator

Advantages and Disadvantages

Advantages

  • High conversion efficiency reduces power loss
  • Wide input voltage range allows compatibility with various power sources
  • Compact form factor enables easy integration into space-constrained designs
  • Adjustable output voltage provides flexibility for different device requirements
  • Low quiescent current contributes to extended battery life

Disadvantages

  • Limited maximum output current compared to some other voltage regulators
  • Requires external components for proper operation and stability

Working Principles

The TPS61281AYFFR operates based on the principle of pulse width modulation (PWM) control. It utilizes an internal switch to rapidly turn on and off, regulating the output voltage by adjusting the duty cycle of the switching signal. This switching action efficiently steps up the input voltage to the desired output voltage level.

Detailed Application Field Plans

The TPS61281AYFFR finds extensive application in various portable electronic devices, including but not limited to: - Smartphones - Tablets - Wearable devices (smartwatches, fitness trackers) - Portable audio players - Handheld gaming consoles

Detailed and Complete Alternative Models

  1. TPS61280AYFFR: Similar to the TPS61281AYFFR, but with a lower maximum output current of 800mA.
  2. TPS61282AYFFR: Similar to the TPS61281AYFFR, but with a higher maximum output current of 1.5A.
  3. TPS61320AYFFR: A related product offering a fixed output voltage of 3.3V.

(Note: This list is not exhaustive, and there may be other alternative models available in the market.)

Word count: 550

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TPS61281AYFFR en soluciones técnicas

Sure! Here are 10 common questions and answers related to the application of TPS61281AYFFR in technical solutions:

  1. Q: What is the TPS61281AYFFR? A: The TPS61281AYFFR is a high-efficiency, low-quiescent current boost converter designed for battery-powered applications.

  2. Q: What is the input voltage range of the TPS61281AYFFR? A: The TPS61281AYFFR has an input voltage range of 0.3V to 5.5V.

  3. Q: What is the output voltage range of the TPS61281AYFFR? A: The TPS61281AYFFR can provide an output voltage range from 1.8V to 5.5V.

  4. Q: What is the maximum output current of the TPS61281AYFFR? A: The TPS61281AYFFR can deliver a maximum output current of 1.2A.

  5. Q: Can the TPS61281AYFFR operate in a low-power mode? A: Yes, the TPS61281AYFFR features a low-power mode that reduces the quiescent current to extend battery life.

  6. Q: Is the TPS61281AYFFR suitable for use in portable devices? A: Yes, the TPS61281AYFFR is specifically designed for battery-powered applications, making it suitable for use in portable devices.

  7. Q: Does the TPS61281AYFFR have built-in protection features? A: Yes, the TPS61281AYFFR includes features like overcurrent protection, thermal shutdown, and undervoltage lockout to ensure safe operation.

  8. Q: Can the TPS61281AYFFR be used in automotive applications? A: Yes, the TPS61281AYFFR is qualified for automotive applications and can operate in a wide temperature range.

  9. Q: What is the efficiency of the TPS61281AYFFR? A: The TPS61281AYFFR has a high efficiency of up to 95%, which helps maximize battery life.

  10. Q: Are there any evaluation modules or reference designs available for the TPS61281AYFFR? A: Yes, Texas Instruments provides evaluation modules and reference designs that can help users quickly prototype and implement the TPS61281AYFFR in their applications.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and application notes for detailed information.