Consulte las especificaciones para obtener detalles del producto.
NTCLE100E3333GB0
Introduction
The NTCLE100E3333GB0 is a thermistor belonging to the NTCLE series, designed for temperature sensing applications. This entry provides an overview of the product, including its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Thermistor
- Use: Temperature sensing
- Characteristics: High sensitivity to temperature changes, small size, and fast response time
- Package: Radial leaded, epoxy-coated
- Essence: Accurate temperature measurement in various electronic devices
- Packaging/Quantity: Available in tape and reel packaging, quantity varies by supplier
Specifications
- Resistance at 25°C: 33 kΩ
- Tolerance: ±2%
- B Value: 3333 K
- Operating Temperature Range: -55°C to 150°C
- Maximum Power Rating: 125 mW
- Thermal Time Constant: 7 seconds
Detailed Pin Configuration
The NTCLE100E3333GB0 has two radial leads for connection. The pinout configuration is as follows: - Pin 1: Connected to one end of the thermistor element - Pin 2: Connected to the other end of the thermistor element
Functional Features
- High Sensitivity: Provides accurate temperature measurements due to its high sensitivity to temperature changes.
- Fast Response Time: Rapidly responds to temperature variations, making it suitable for dynamic temperature monitoring.
- Small Size: Compact design allows for integration into space-constrained electronic devices.
Advantages and Disadvantages
Advantages
- Accurate temperature sensing
- Fast response time
- Small form factor
Disadvantages
- Limited operating temperature range compared to some other thermistors
- Sensitivity to environmental factors such as humidity
Working Principles
The NTCLE100E3333GB0 operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases with increasing temperature. This change in resistance is used to measure and monitor temperature variations in electronic circuits and systems.
Detailed Application Field Plans
The NTCLE100E3333GB0 is widely used in various applications, including: - Temperature monitoring in consumer electronics - Thermal management in automotive systems - Temperature compensation in industrial control systems - Medical device temperature sensing
Detailed and Complete Alternative Models
Some alternative models to the NTCLE100E3333GB0 include: - NTCLE100E3103JB0: Similar characteristics with a different B value - NTCLE100E3473JB0: Higher resistance at 25°C with similar B value - NTCLE100E3223JB0: Lower resistance at 25°C with similar B value
In conclusion, the NTCLE100E3333GB0 thermistor offers high sensitivity and fast response time, making it suitable for precise temperature sensing in various electronic applications.
Word Count: 443
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de NTCLE100E3333GB0 en soluciones técnicas
What is the NTCLE100E3333GB0?
- The NTCLE100E3333GB0 is a thermistor, specifically an NTC (Negative Temperature Coefficient) thermistor, with a resistance of 33k ohms at 25°C.
How does the NTCLE100E3333GB0 work in technical solutions?
- The NTCLE100E3333GB0 is used to measure temperature by sensing changes in its resistance as the temperature changes. It can be integrated into various technical solutions for temperature monitoring and control.
What are the typical applications of the NTCLE100E3333GB0?
- The NTCLE100E3333GB0 is commonly used in temperature sensing and compensation circuits, battery management systems, HVAC systems, and industrial automation equipment.
What is the temperature range for the NTCLE100E3333GB0?
- The NTCLE100E3333GB0 has a wide operating temperature range, typically from -40°C to 125°C, making it suitable for various environmental conditions.
How accurate is the NTCLE100E3333GB0 in temperature measurement?
- The accuracy of the NTCLE100E3333GB0 depends on the specific application and circuit design, but it can provide precise temperature measurements when properly calibrated and compensated.
Can the NTCLE100E3333GB0 be used for temperature compensation in electronic circuits?
- Yes, the NTCLE100E3333GB0 is often used for temperature compensation in electronic circuits to maintain stable performance across varying temperatures.
What are the key electrical characteristics of the NTCLE100E3333GB0?
- The NTCLE100E3333GB0 has a resistance tolerance, thermal time constant, and dissipation factor that are important considerations for its integration into technical solutions.
How should the NTCLE100E3333GB0 be connected in a circuit?
- The NTCLE100E3333GB0 should be connected in series or parallel with other components based on the specific application requirements and the desired temperature measurement accuracy.
Are there any precautions to consider when using the NTCLE100E3333GB0 in technical solutions?
- Precautions include protecting the thermistor from moisture, ensuring proper thermal contact for accurate temperature sensing, and considering self-heating effects in high-current applications.
Where can I find detailed technical specifications and application notes for the NTCLE100E3333GB0?
- Detailed technical specifications and application notes for the NTCLE100E3333GB0 can be found in the datasheet provided by the manufacturer, as well as in technical reference materials from reputable sources in the electronics industry.