Vishay Semiconductor Diodes Division
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
MBRB1060HE3_A/P
Ver Detalle Hojas de datos

MBRB1060HE3_A/P

Introduction

The MBRB1060HE3A/P is a diode belonging to the category of Schottky rectifier diodes. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MBRB1060HE3A/P.

Basic Information Overview

  • Category: Schottky rectifier diode
  • Use: It is used as a high-efficiency rectifier in various electronic circuits.
  • Characteristics: The diode exhibits low forward voltage drop, fast switching speed, and high current capability.
  • Package: The MBRB1060HE3_A/P is typically available in a TO-263AB package.
  • Essence: It is designed to provide efficient rectification in power supply and other electronic circuits.
  • Packaging/Quantity: The diode is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Forward Voltage Drop: Typically 0.65V at 10A
  • Reverse Voltage: 60V
  • Average Rectified Current: 10A
  • Operating Temperature Range: -65°C to +175°C
  • Storage Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The MBRB1060HE3_A/P typically has three pins: 1. Anode (A) 2. Cathode (K) 3. Not connected (NC)

Functional Features

  • Low forward voltage drop for high efficiency
  • Fast switching speed for rapid response in circuits
  • High current capability for demanding applications

Advantages and Disadvantages

Advantages

  • High efficiency due to low forward voltage drop
  • Fast response time enhances circuit performance
  • Suitable for high-current applications

Disadvantages

  • Limited reverse voltage compared to some other diode types
  • Higher cost compared to standard silicon diodes

Working Principles

The MBRB1060HE3_A/P operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes.

Detailed Application Field Plans

The MBRB1060HE3_A/P is commonly used in the following applications: - Switching power supplies - DC-DC converters - Reverse polarity protection circuits - Battery charging circuits

Detailed and Complete Alternative Models

Some alternative models to the MBRB1060HE3A/P include: - MBRB1560HE3A/P: Similar characteristics with higher reverse voltage rating - MBRB2045CTG: Higher current capability with slightly higher forward voltage drop - MBRF20100CT: Higher reverse voltage and current ratings for more demanding applications

In conclusion, the MBRB1060HE3_A/P is a Schottky rectifier diode with specific characteristics that make it suitable for various electronic applications requiring high efficiency and fast switching. Its use in power supply and related circuits makes it a valuable component in modern electronics.

[Word count: 411]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de MBRB1060HE3_A/P en soluciones técnicas

  1. What is MBRB1060HE3_A/P?

    • MBRB1060HE3_A/P is a Schottky diode rectifier designed for high efficiency and low power loss in applications such as switch mode power supplies, free-wheeling diodes, and reverse battery protection.

  2. What is the maximum forward voltage of MBRB1060HE3_A/P?

    • The maximum forward voltage of MBRB1060HE3_A/P is typically 0.65V at 10A.

  3. What is the reverse voltage rating of MBRB1060HE3_A/P?

    • MBRB1060HE3_A/P has a reverse voltage rating of 60V.

  4. What are the typical applications of MBRB1060HE3_A/P?

    • Typical applications of MBRB1060HE3_A/P include DC-DC converters, output rectification, and reverse polarity protection.

  5. What is the maximum junction temperature of MBRB1060HE3_A/P?

    • The maximum junction temperature of MBRB1060HE3_A/P is 150°C.

  6. What is the package type of MBRB1060HE3_A/P?

    • MBRB1060HE3_A/P comes in a TO-263AB (D2PAK) package.

  7. What is the reverse recovery time of MBRB1060HE3_A/P?

    • The reverse recovery time of MBRB1060HE3_A/P is typically 20ns.

  8. Can MBRB1060HE3_A/P be used in automotive applications?

    • Yes, MBRB1060HE3_A/P is suitable for automotive applications due to its high efficiency and low power loss characteristics.

  9. Does MBRB1060HE3_A/P require a heatsink for operation?

    • It is recommended to use a heatsink with MBRB1060HE3_A/P when operating at high currents or in high ambient temperatures to ensure optimal performance and reliability.

  10. Is MBRB1060HE3_A/P RoHS compliant?

    • Yes, MBRB1060HE3_A/P is RoHS compliant, making it suitable for use in environmentally conscious designs.