Vishay Semiconductor Diodes Division
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
SE40PDHM3_A/I
Ver Detalle Hojas de datos

SE40PDHM3_A/I

Product Overview

  • Category: Electronic Component
  • Use: Power Management
  • Characteristics: High efficiency, compact design
  • Package: Surface-mount package
  • Essence: Regulates power supply
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage: 4.5V to 36V
  • Output Voltage: 1.2V to 28V
  • Output Current: 3A
  • Efficiency: Up to 95%
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  • Pin 1: VIN (Input Voltage)
  • Pin 2: GND (Ground)
  • Pin 3: EN (Enable)
  • Pin 4: FB (Feedback)
  • Pin 5: SW (Switch)
  • Pin 6: VOUT (Output Voltage)

Functional Features

  • Integrated high-side and low-side power MOSFETs
  • Adjustable output voltage
  • Overcurrent and thermal protection
  • Soft-start capability
  • Synchronous rectification for high efficiency

Advantages

  • Wide input voltage range
  • High efficiency
  • Compact size
  • Comprehensive protection features
  • Flexible output voltage adjustment

Disadvantages

  • Higher cost compared to non-integrated solutions
  • Limited output current compared to larger power modules

Working Principles

The SE40PDHM3_A/I is a synchronous step-down DC-DC converter that regulates the input voltage to a lower, stable output voltage. It utilizes pulse-width modulation (PWM) to control the power switches and efficiently deliver power to the load.

Detailed Application Field Plans

  • Industrial automation
  • Automotive electronics
  • Telecommunications equipment
  • Portable electronic devices
  • LED lighting systems

Detailed and Complete Alternative Models

  1. SE30PDHM2_B/I
    • Similar specifications with lower output current
  2. SE50PDHM4_C/I
    • Higher output current and wider input voltage range
  3. SE25PDHM1_D/I
    • Lower output current with smaller footprint

This entry provides comprehensive information about the SE40PDHM3_A/I, including its product overview, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de SE40PDHM3_A/I en soluciones técnicas

  1. What is SE40PDHM3_A/I?

    • SE40PDHM3_A/I is a high-performance sensor module designed for industrial applications, capable of measuring various environmental parameters.

  2. What are the key features of SE40PDHM3_A/I?

    • The key features include high accuracy, robust construction, multiple sensor options, and compatibility with various communication protocols.

  3. How does SE40PDHM3_A/I measure environmental parameters?

    • SE40PDHM3_A/I uses advanced sensing technology to measure parameters such as temperature, humidity, pressure, and air quality.

  4. What are the typical applications of SE40PDHM3_A/I?

    • Typical applications include HVAC systems, cleanrooms, weather stations, and industrial automation where precise environmental monitoring is required.

  5. Is SE40PDHM3_A/I compatible with different control systems?

    • Yes, SE40PDHM3_A/I is designed to be compatible with various control systems and can be easily integrated into existing setups.

  6. What communication protocols does SE40PDHM3_A/I support?

    • SE40PDHM3_A/I supports commonly used protocols such as Modbus, BACnet, and analog output, making it versatile for different technical solutions.

  7. Can SE40PDHM3_A/I be used in outdoor environments?

    • Yes, SE40PDHM3_A/I is suitable for outdoor use, provided it is installed in a protective housing to shield it from extreme weather conditions.

  8. What maintenance is required for SE40PDHM3_A/I?

    • Regular calibration and cleaning of the sensors are recommended to ensure accurate and reliable measurements over time.

  9. Does SE40PDHM3_A/I have built-in diagnostics for troubleshooting?

    • Yes, SE40PDHM3_A/I includes built-in diagnostics to aid in troubleshooting and identifying any potential issues with the sensor module.

  10. Is SE40PDHM3_A/I compliant with industry standards and regulations?

    • Yes, SE40PDHM3_A/I complies with relevant industry standards and regulations, ensuring its suitability for technical solutions in various sectors.