Consulte las especificaciones para obtener detalles del producto.
TZM5265F-GS18
Introduction
TZM5265F-GS18 is a high-performance integrated circuit belonging to the category of voltage regulators. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Voltage Regulator
- Use: Provides stable voltage output for electronic devices
- Characteristics: High efficiency, low dropout voltage, thermal shutdown protection
- Package: TO-263-5L
- Essence: Ensures reliable and stable power supply for various applications
- Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications
- Input Voltage Range: 4.5V to 28V
- Output Voltage: 3.3V
- Output Current: 5A
- Dropout Voltage: 300mV at 5A
- Operating Temperature Range: -40°C to 125°C
- Quiescent Current: 85µA
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- NC (No Connection)
- VOUT (Output Voltage)
- EN (Enable)
Functional Features
- High Efficiency: Minimizes power loss and heat generation
- Low Dropout Voltage: Suitable for low input voltage applications
- Thermal Shutdown Protection: Safeguards the IC from overheating
Advantages and Disadvantages
Advantages
- Reliable and stable voltage output
- Wide input voltage range
- Thermal protection for enhanced safety
Disadvantages
- Higher quiescent current compared to some alternatives
- Limited output current compared to higher-rated models
Working Principles
TZM5265F-GS18 utilizes a feedback control mechanism to maintain a constant output voltage despite variations in input voltage and load conditions. It regulates the output by adjusting the pass device to ensure a stable voltage supply.
Detailed Application Field Plans
This voltage regulator is suitable for a wide range of applications including: - Consumer electronics - Automotive systems - Industrial equipment - Telecommunications devices
Detailed and Complete Alternative Models
- LM2940T-5.0/NOPB: 1A Low Dropout Regulator
- LT1763CS8-3.3#PBF: 500mA, Low Noise LDO Regulator
- MIC29302WT: 3A Low-Dropout Voltage Regulator
In conclusion, TZM5265F-GS18 is a reliable and efficient voltage regulator with a wide range of applications. Its stable performance and protective features make it a valuable component in various electronic systems.
Word Count: 398
Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de TZM5265F-GS18 en soluciones técnicas
What is TZM5265F-GS18?
- TZM5265F-GS18 is a high-performance, lead-free solder paste designed for use in electronics assembly.
What are the key features of TZM5265F-GS18?
- TZM5265F-GS18 offers excellent wetting and printing performance, low voiding, and high reliability in various technical solutions.
In what applications can TZM5265F-GS18 be used?
- TZM5265F-GS18 is suitable for applications such as SMT (Surface Mount Technology) assembly, PCB (Printed Circuit Board) assembly, and semiconductor packaging.
What are the recommended reflow profiles for TZM5265F-GS18?
- The recommended reflow profiles for TZM5265F-GS18 typically include peak temperatures between 240°C and 260°C, with a time above liquidus of 30-60 seconds.
Does TZM5265F-GS18 comply with industry standards?
- Yes, TZM5265F-GS18 complies with RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulations.
How does TZM5265F-GS18 perform in terms of shelf life and storage conditions?
- TZM5265F-GS18 has a recommended shelf life of 6 months when stored at temperatures below 25°C in its original sealed container.
Can TZM5265F-GS18 be used for fine-pitch components and small package sizes?
- Yes, TZM5265F-GS18 is formulated to provide excellent printability and solder joint reliability for fine-pitch components and small package sizes.
What type of cleaning is recommended after using TZM5265F-GS18?
- It is recommended to use a suitable cleaning agent compatible with no-clean flux residues to ensure proper post-soldering cleanliness.
Does TZM5265F-GS18 require any special handling precautions?
- While handling TZM5265F-GS18, it is important to avoid exposure to excessive heat, moisture, or direct sunlight, and to follow standard ESD (Electrostatic Discharge) precautions.
Are there any known compatibility issues with other materials when using TZM5265F-GS18?
- TZM5265F-GS18 is compatible with common PCB substrates, component finishes, and solder mask materials, but it's advisable to conduct compatibility tests with specific materials if necessary.