Vishay Semiconductor Diodes Division
La imagen puede ser una representación.
Consulte las especificaciones para obtener detalles del producto.
V35PWM15-M3/I
Ver Detalle Hojas de datos

V35PWM15-M3/I

Introduction

The V35PWM15-M3/I is a power management integrated circuit (IC) designed for use in voltage regulation and power supply applications. This article provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Power Management IC
  • Use: Voltage regulation and power supply applications
  • Characteristics: High efficiency, compact design, wide input voltage range
  • Package: Surface-mount package
  • Essence: Regulating and controlling power flow
  • Packaging/Quantity: Tape and reel packaging, quantity varies by supplier

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 24V
  • Output Current: Up to 3A
  • Switching Frequency: 300kHz to 2MHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The V35PWM15-M3/I features a standard pin configuration with input, output, and control pins. The specific pinout can be found in the product datasheet.

Functional Features

  • Voltage Regulation: Provides stable output voltage regardless of input variations
  • Overcurrent Protection: Safeguards against excessive current draw
  • Overtemperature Protection: Prevents damage due to high operating temperatures
  • Soft-Start Function: Gradually ramps up the output voltage to reduce inrush current

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Compact design

Disadvantages

  • Higher cost compared to non-integrated solutions
  • Limited output current compared to larger power management ICs

Working Principles

The V35PWM15-M3/I operates on the principle of pulse-width modulation (PWM) to regulate the output voltage. By adjusting the duty cycle of the switching signal, it controls the average output voltage to maintain a constant level despite fluctuations in the input voltage.

Detailed Application Field Plans

The V35PWM15-M3/I is suitable for various applications, including: - Point-of-load converters - Battery-powered devices - Industrial automation systems - LED lighting - Telecommunications equipment

Detailed and Complete Alternative Models

  • V35PWM10-M3/I: Lower output current version of the same IC
  • V35PWM20-M3/I: Higher output current version of the same IC
  • V35PWM15-M4/I: Variant with additional features such as remote voltage sensing

In conclusion, the V35PWM15-M3/I is a versatile power management IC with a wide range of applications and several alternative models offering different capabilities to suit specific requirements.

[Word count: 410]

Enumere 10 preguntas y respuestas comunes relacionadas con la aplicación de V35PWM15-M3/I en soluciones técnicas

  1. What is the V35PWM15-M3/I used for?

    • The V35PWM15-M3/I is a voltage regulator module commonly used to provide stable power supply in various technical solutions.

  2. What is the input voltage range of the V35PWM15-M3/I?

    • The input voltage range of the V35PWM15-M3/I is typically between 4.5V and 28V.

  3. What is the output voltage range of the V35PWM15-M3/I?

    • The output voltage range of the V35PWM15-M3/I is adjustable, typically from 0.8V to 24V.

  4. What is the maximum output current of the V35PWM15-M3/I?

    • The maximum output current of the V35PWM15-M3/I is typically around 15A.

  5. What are the key features of the V35PWM15-M3/I?

    • The V35PWM15-M3/I features include overcurrent protection, thermal shutdown, and adjustable output voltage.

  6. How is the V35PWM15-M3/I typically mounted?

    • The V35PWM15-M3/I is commonly mounted using through-hole or surface mount technology.

  7. What are the typical applications of the V35PWM15-M3/I?

    • The V35PWM15-M3/I is often used in industrial automation, telecommunications, and automotive electronics.

  8. Does the V35PWM15-M3/I require external components for operation?

    • Yes, the V35PWM15-M3/I typically requires input and output capacitors for stable operation.

  9. What is the operating temperature range of the V35PWM15-M3/I?

    • The V35PWM15-M3/I is designed to operate within a temperature range of -40°C to 125°C.

  10. Is the V35PWM15-M3/I compliant with any industry standards?

    • Yes, the V35PWM15-M3/I is often compliant with industry standards such as RoHS and REACH.