Communication interface chip UART485/232

Quad Differential Line Driver 16-SOIC 0 to 70

The FSUSB42 is a bidirectional, low power, two port, high speed USB2.0 switch. It is configured as a double pole double throw (DPDT) switch and is suitable for switching between two high speed (480Mbps) sources or high speed and full speed (12Mbps) sources. The FSUSB42 is USB2.0 compliant with a very low on-capacitance (CON) of 5.5pF. The device's wide bandwidth (720MHz) exceeds that required to pass the third harmonic, resulting in exceptionally low signal edge and phase distortion. Excellent channel-to-channel crosstalk performance also minimizes interference. The FSUSB42 includes special circuitry on the switch I/O pin for applications where the VCC supply is powered down (VCC=0), making the device robust against overvoltage conditions. The device is designed to minimize current consumption even when the control voltage applied to the SEL pin is lower than the supply voltage (VCC). This feature is especially useful in ultra-mobile applications such as cellular phones; it provides direct interface to the general-purpose I/O of the baseband processor. Other applications include switching and interface sharing in mobile cellular phones, PDAs, digital cameras, printers and notebook computers.

INA137 Audio Differential Line Receiver, +-6dB (G=1/2 or 2)

PCI1510 Single Slot PC CardBus Controller

Type: Transceiver Driver/Receiver: 2/2 Data Rate: 250Kbps Supply Voltage: 3V~5.5V MAX3232 3V to 5.5V Multichannel RS-232 Line Driver and Receiver

Quad Channel, 2/2, 150Mbps Digital Isolator 16-SOIC -40 to 125

High Output Full Duplex RS 485 Driver and Receiver 8-SOIC -40 to 85

Small size and small encapsulation; +3.3V, 1Mbps, low power consumption

Automotive Audio Bus A2B Transceiver

ISO3080 Isolated 5-V Full-Duplex RS-485 Transceiver

3V to 5.5V Multi-Channel 600kbps RS-232 Line Driver/Receiver with +/-15kV IEC-ESD Protection 28-TSSOP -40 to 85

Protocol Class: RS422, RS485 Data Rate: 10Mbps Type: Transceiver