Logic device/transceiver/encoder

The LVT574 and LVTH574 are high-speed, low-power octal D-type flip-flops with separate D-type inputs for each flip-flop and 3-state outputs for bus-oriented applications. Buffered Clock (CP) and Output Enable (OE#) are common to all flip-flops. The LVTH574 data inputs include bus holds, eliminating the need for external pull-up resistors to hold unused inputs. These octal flip flops are suitable for low voltage (3.3V) VCC applications but provide a TTL interface to a 5V environment. The LVT574 and LVTH574 are fabricated on an advanced BiCMOS process, which enables high-speed operation similar to 5V ABTs while maintaining low power consumption.

Dual Positive Edge Triggered D-Type Flip-Flop with Clear and Preset 14-SO -40 to 85

Dual Negative Edge Triggered D-Type Flip-Flops with Clear and Preset 14-TSSOP -40 to 85

Retriggerable Monostable Multivibrator 14-SO 0 to 70

The MC74VHC1GT14 is a single gate CMOS Schmitt trigger inverter fabricated using a silicon gate CMOS process. It achieves high-speed operation similar to an equivalent bipolar Schottky TTL while maintaining CMOS low power consumption. The internal circuit consists of three stages, including a buffer output that provides high noise immunity and stable output. The device input is compatible with TTL-type input thresholds, and the output has a full CMOS level output swing. Input protection circuitry on the device allows overvoltage tolerance on the inputs, enabling the device to be used as a logic level translator from 3.0V CMOS logic to 5.0V CMOS logic, or 1.8V CMOS logic to 3.0V CMOS logic, and Capable of running on high voltage power supplies. The MC74VHC1GT14 input structure provides protection when voltages up to 5.5V are applied regardless of the supply voltage. This allows the MC74VHC1GT14 to be used as an interface to 5V to 3V circuits. The output structure also provides protection when VCC = 0V. These input and output structures help prevent device damage due to supply voltage - input/output voltage mismatch, battery backup, hot insertion, etc. The MC74VHC1GT14 can be used to enhance noise immunity or to square slowly changing waveforms.