Logic device/transceiver/encoder

SN74LVC1G97 Configurable Multifunction Door

Dual D-Type Flip-Flops

Direction: Up Number of elements: 2 Number of elements: 4 Reset method: Asynchronous Timing method: Synchronous Counting rate: 8MHz Operating voltage: 3V~18V CMOS dual BCD up counter

High-Performance Silicon-Gate CMOS MC74HC4051A, MC74HC4052A, and MC74HC4053A use silicon-gate CMOS technology to achieve fast propagation delay, low on-resistance, and low off-leakage current. These analog multiplexers/demultiplexers control analog voltages that vary over the full supply range from VCC to VEE. The pin-out of the HC4051A, HC4052A and HC4053A is identical to the metal gate MC14051AB, MC14052AB and MC14053AB. The channel select input determines which analog input/output is connected to the common output/input via an analog switch. When the enable pin is high, all analog switches are off. Channel select and enable inputs are compatible with standard CMOS outputs; with pull-up resistors, they are compatible with LSTTL outputs. These device designs are also more linear in on-resistance (RON) with respect to input voltage than metal-gate CMOS analog switches. For multiplexer/demultiplexers with inhibit current protection, see HC4851A and HC4852A.

The MC74VHCT50A is a six-way non-inverting buffer fabricated using a silicon-gate CMOS process. It achieves high-speed operation similar to an equivalent bipolar Schottky TTL while maintaining CMOS low power consumption. The internal circuit consists of three stages, including a buffer output that provides high noise immunity and stable output. The device input is compatible with TTL-type input thresholds, and the output has a full CMOS level output swing. Input protection circuitry on the device allows overvoltage tolerance on the inputs, enabling the device to be used as a logic level translator converting from 3.0 V CMOS logic and to operate from high voltage supplies. The MC74VHCT50A input structure provides protection when voltages up to 7.0 V are applied regardless of the supply voltage. This allows the MC74VHCT50A to be used as an interface to 5 V to 3 V circuits. The output structure also provides protection when VCC = 0V. These input and output structures help prevent device damage due to supply voltage - input/output voltage mismatch, battery backup, hot insertion, etc.

SN74LV1T08 Single-Supply 2-Input Positive-AND Gate with CMOS Logic-Level Translator

The NC7SV32 is a two-input OR single-gate from ON Semiconductor's TinyLogic Ultra Low Power (ULP-A) family. ULP-A is suitable for applications requiring very high speed, high drive and low power consumption. The product has a wide low-voltage operating range (0.9V to 3.6V VCC), suitable for applications with drive and speed requirements beyond the TinyLogicULP series, but still has best-in-class low power consumption. The NC7SV32 is designed to optimize power consumption and speed, using an advanced CMOS process to achieve high-speed operation while maintaining the low power consumption of CMOS.

SN74VMEH22501A 8-bit general-purpose bus transceiver and two 1-bit bus transceivers with 3-state outputs

SN74VMEH22501A 8-bit general-purpose bus transceiver and two 1-bit bus transceivers with 3-state outputs