Logic device/transceiver/encoder

The LCX541 is an octal buffer/line driver that can be used as a memory and address driver, clock driver, and bus-oriented transmitter/receiver. The LCX541 is the non-reverse alternative to the LCX540. This device is similar in function to the LCX244, while also offering a flow-through architecture (input on opposite side of output). This pin-out arrangement makes the device ideal for use as an output port of a microprocessor, which simplifies layout and enables better PC motherboard density. The LCX541 is suitable for low-voltage (2.5V or 3.3V) VCC applications and is capable of interfacing to a 5V signal environment. The LCX541 uses an advanced CMOS process to achieve high-speed operation while maintaining the low power consumption of CMOS.

SN74LVTH162374 3.3-V ABT 16-bit edge D-type flip-flop with 3-state outputs

Automotive Single 2V to 5.5V Inverter 5-SC70 -40 to 125

NC7SZ11 is a single-channel 3-input AND gate, which belongs to the ultra-high-speed series of Fairchild TinyLogic. Fabricated using advanced CMOS technology, the device achieves ultra-high speed and high output drive while operating over a wide V

Logic Gates Quad 2-Input Positive-OR Gates

6-Channel, 4.75V to 5.25V Bipolar Inverter 14-SOIC 0 to 70 with Open Collector Outputs

Type: Decoder/Multiplexer Low-level output current (IOL): 5.2mA High-level output current (IOH): 5.2mA Power supply: Single supply Supply voltage: 2V~6V Operating temperature: -40℃~+ 105°C

SN74LV541A Octal Buffer/Driver with 3-State Outputs

The high-performance silicon-gate MC74VHC4051, MC74VHC4052, and MC74VHC4053 use silicon-gate CMOS technology for fast propagation delay, low on-resistance, and low off-leakage current. These analog multiplexers/demultiplexers control analog voltages that vary over the full supply range from VCC to VEE. The VHC4051, VHC4052, and VHC4053 are pin-out identical to the high-speed HC4051A, HC4052A, and HC4053A, and the metal-gate MC14051B, MC14052B, and MC14053B. The channel select input determines which analog input/output is connected to the common output/input via an analog switch. When the enable pin is high, all analog switches are off. Channel select and enable inputs are compatible with standard CMOS outputs; with pull-up resistors, they are compatible with LSTTL outputs. These device designs are also more linear in on-resistance (RON) with respect to input voltage than metal-gate CMOS analog switches.

The NL17SZ126 MiniGate is a 3-state buffer operating from 1.65 V to 5.5 V using the very popular SC70/SC88a/SOT-353 encapsulation and the extremely small 1.6 X 1.6 X .6 mm SOT553 encapsulation.

Four 2? Input NOR Gates