Logic device/transceiver/encoder

Número de pieza
TI (Texas Instruments)
Fabricantes
Descripción
64711 PCS
En stock
Número de pieza
TI (Texas Instruments)
Fabricantes
Descripción
57591 PCS
En stock
Número de pieza
TI (Texas Instruments)
Fabricantes
4-Channel, 2-Input, 2V to 5.5V NOR Gate 14-SOIC -40 to 125
Descripción
89031 PCS
En stock
Número de pieza
TI (Texas Instruments)
Fabricantes
4-Channel, 4-Input, 2V to 6V NAND Gate with Schmitt Trigger Inputs 14-SOIC -40 to 85
Descripción
91329 PCS
En stock
Número de pieza
TI (Texas Instruments)
Fabricantes
4-Channel, 2-Input, 3V to 5.5V OR Gate 16-SOIC -40 to 85
Descripción
76471 PCS
En stock
Número de pieza
TI (Texas Instruments)
Fabricantes
4-Channel, 2-Input, 3V to 18V NAND Gate 14-TSSOP -55 to 125
Descripción
60630 PCS
En stock
Número de pieza
rochester
Fabricantes
Descripción
63583 PCS
En stock
Número de pieza
ADI
Fabricantes
Descripción
68748 PCS
En stock
Número de pieza
Nexperia
Fabricantes
Descripción
56169 PCS
En stock
Número de pieza
onsemi (Ansemi)
Fabricantes
MM74HCT573 Octal D-type Latch and MM74HCT574 Octal D-type Flip-Flop are manufactured with advanced silicon gate CMOS technology, which has the inherent advantages of low power consumption and wide power supply range, and has LS-TTL input and output characteristics, and realizes pin output compatible. The 3-state outputs can drive 15 LS-TTL loads. All inputs are protected from electrostatic discharge damage by internal diodes to VCC and ground. When the MM74HCT573 latch enable input is high, the Q output will follow the D input. When Latch Enable goes low, the data at the D input remains at the output until Latch Enable goes high again. When a high logic level is applied to the output control input, all outputs go into a high impedance state, regardless of what signals are present at the other inputs and the state of the storage element. The MM74HCT574 is a rising edge triggered flip-flop. Data on the D input that meets setup and hold time requirements is transferred to the Q output on a positive-going transition of the clock (CK) input. When a high logic level is applied to the output control (OC) input, all outputs go into a high-impedance state, regardless of the signals present at the other inputs and the state of the storage elements. The MM74HCT device is suitable for interfacing between TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.
Descripción
83673 PCS
En stock
Número de pieza
onsemi (Ansemi)
Fabricantes
Descripción
95769 PCS
En stock
Número de pieza
TI (Texas Instruments)
Fabricantes
Octal Bus Transceiver 20-SSOP 0 to 70
Descripción
84156 PCS
En stock
Número de pieza
TI (Texas Instruments)
Fabricantes
Octal Bus Transceiver and Registers with 3-State Outputs 24-TSSOP -40 to 85
Descripción
90163 PCS
En stock
Número de pieza
TI (Texas Instruments)
Fabricantes
16-Bit Transparent D-Latch with 3-State Output 48-TVSOP -40 to 85
Descripción
52214 PCS
En stock
Número de pieza
TI (Texas Instruments)
Fabricantes
Descripción
85670 PCS
En stock
Número de pieza
TI (Texas Instruments)
Fabricantes
IEEE Std 1149.1 (JTAG) Boundary-Scan Test Set 24-SOIC 0 to 70 with Octal Bus Transceivers
Descripción
54209 PCS
En stock
Número de pieza
ADI/MAXIM (MAXIM)
Fabricantes
Descripción
85798 PCS
En stock
Número de pieza
ADI/MAXIM (MAXIM)
Fabricantes
Descripción
93941 PCS
En stock
Número de pieza
ADI/MAXIM (MAXIM)
Fabricantes
Descripción
63060 PCS
En stock
Número de pieza
NXP (NXP)
Fabricantes
Descripción
58949 PCS
En stock