Logic device/transceiver/encoder

Quad 2-Input with Non-Schmitt Trigger

The MC14175B quad D-type flip-flop is constructed in a monolithic structure using MOS P-channel and N-channel enhancement mode devices. Each of the four flip-flops is triggered by the rising edge of the common clock input (C). An active-low reset input (R) asynchronously resets all flip-flops. Each flip-flop has an independent data (D) input and complementary outputs (Q and Qbar). These devices can be used as shift register elements, or T-type flip-flops for counter and switching applications.

numbers in the model number

High-Performance Silicon-Gate CMOS MC74HC4051A, MC74HC4052A, and MC74HC4053A use silicon-gate CMOS technology to achieve fast propagation delay, low on-resistance, and low off-leakage current. These analog multiplexers/demultiplexers control analog voltages that vary over the full supply range from VCC to VEE. The pin-out of the HC4051A, HC4052A and HC4053A is identical to the metal gate MC14051AB, MC14052AB and MC14053AB. The channel select input determines which analog input/output is connected to the common output/input via an analog switch. When the enable pin is high, all analog switches are off. Channel select and enable inputs are compatible with standard CMOS outputs; with pull-up resistors, they are compatible with LSTTL outputs. These device designs are also more linear in on-resistance (RON) with respect to input voltage than metal-gate CMOS analog switches. For multiplexer/demultiplexers with inhibit current protection, see HC4851A and HC4852A.

Single Retriggerable Monostable Multivibrator with Schmitt Trigger Input 8-SM8 -40 to 125

Multiplexer Low-level output current (IOL): 8mA High-level output current (IOH): 400μA Power supply: single supply Supply voltage: 4.75V~5.25V

8-bit CMOS shift register

SN74LS145 BCD to Decimal Decoder/Driver

SN74AC08 Quad 2-Input Positive-AND Gate