Power chip

Input Voltage (V) 2.5-6V Maximum Current (A) - Switching Frequency (Hz) 1 MHz

Dual-channel H-bridge current-controlled motor driver: single or dual brushed DC motors, one stepper motor. Current control at fixed frequency is optional: 2 bits current control, providing 4 current steps. Low On-Resistance Metal Oxide Semiconductor Field Effect Transistor (MOSFET): 4.0A Maximum Drive Current at 24V, Ta = 25°C; 300mΩ RDS(on) at 24V, Ta = 25°C (Typical HS + LS). The maximum working withstand voltage is 50V. sleep mode low current. Built-in 3.3V reference voltage. Surface mount encapsulation with heat sink. Protection features: Overcurrent Protection (OCP); Thermal Shutdown (TSD); Undervoltage Lockout (UVLO); Fault Display Pin (nFAULT).

Output Type: Fixed Output Polarity: Positive Maximum Input Voltage: 35V Output Voltage: 12V Output Current: 500mA Power Supply Ripple Rejection Ratio (PSRR): 71dB@(120Hz)

LMS1587 3A Fixed/Adjustable Output Linear Regulator

Capacitor Charger Controller

UCC28C43 BiCMOS Low Power Current Mode PWM Controller

200mA, Low IQ, Low Dropout Voltage Regulator for Portable Devices 5-SC70 -40 to 125

Automotive 9A/9A single-channel gate driver 8-SOIC with inverting input -40 to 105

Ultralow IQ, 50mA LDO Linear Regulator with Power Good Output 5-SC70 -40 to 85

DCDC power supply, SOT23-5, Iout=1.5A; VIN=2.6-5.5V; Vout=ADJ, VFB=0.6V, FOSC=2MHz

1.6uA static power consumption, 40V withstand voltage, 300mA output, high transient response

Input Voltage: 10.8-13.2Vdc\nOutput Voltage: 12V\nOutput Current: 0.167A\nOutput Power: 2W\nIsolation Voltage: 1500Vdc\nConversion Efficiency: 90%\nFeature: Output Short Circuit Protection

26V, Bidirectional Current Sense Amplifier 10-UQFN -40 to 125